Standard HSS twist drill bits snatch, wander, and break rapidly when driven by high-torque impact wrenches or used on site without a pilot hole. The HMT VersaDrive TurboTip Impact Drill Bit Set (209015-SET4) solves this inefficiency by combining an impact-rated stepped geometry with a non-slip shank system to allow rapid, kickback-free hole opening directly through heavy structural steel.

• 1 x 6mm HMT VersaDrive TurboTip Impact Drill Bit

• 1 x 8mm HMT VersaDrive TurboTip Impact Drill Bit

• 1 x 10mm HMT VersaDrive TurboTip Impact Drill Bit

• 1 x 12mm HMT VersaDrive TurboTip Impact Drill Bit

• 1 x 14mm HMT VersaDrive TurboTip Impact Drill Bit

• 1 x 18mm HMT VersaDrive TurboTip Impact Drill Bit

• 1 x 22mm HMT VersaDrive TurboTip Impact Drill Bit

• 1 x Heavy-Duty VersaDrive Storage Case

• Patented TurboTip Stepped Geometry: Starts on contact without centre-punching or pilot drilling, preventing bit-wandering and reducing overall hole-making time by up to 50%.

• High-Grade Impact-Rated Tool Steel: Withstands high-frequency torsional shocks from impact drivers, eliminating shank shear and premature tip shatter.

• Non-Slip VersaDrive Shank: Locks securely into VersaDrive adapters to ensure 100% torque transmission without chuck slip or gouging.

• Optimised Flute Evacuation Zones: Clears steel swarf efficiently from the hole, minimising heat build-up and bit binding during deep-plate penetration.

• Graduated Step-Cutting Action: Distributes cutting forces across incremental steps, preventing tool kickback and user wrist strain when breaking through material.

• TurboTip self-centering point design

• Impact-wrench rated construction for high-torque drilling

• Patented VersaDrive non-slip hex shank architecture

• Premium high-speed steel alloy formulation

• Supplied in a ruggedised foam-lined plastic carry case

• Structural steel frame modification and beam hole enlargement

• On-site steel erection and fabrication without portable mag drills

• Heavy transport chassis repair and metal plate drilling

• Fast hole enlargement in structural sections, angle iron, and plate

When operating these bits with a 1/2-inch impact wrench, let the tool's impact action do the work; applying excessive leaning weight reduces cutting efficiency and increases thermal wear on the bit tip. Apply high-viscosity cutting paste to the flutes prior to drilling, particularly on 18mm and 22mm sizes, to prevent chip welding and prolong edge life.

• Impact-rated design allows direct operation on cordless impact wrenches without pilot holes.

• TurboTip stepped tip prevents grab and snatch during hole breakthrough in thin or thick steel.

• Non-slip VersaDrive shank enables rapid tool swapping across impact drivers, pillar drills, and magnet drills.

• Not designed for deep hole drilling exceeding the maximum step length capacity of each bit.

• Requires specialised VersaDrive adapters to fit standard 3-jaw chucks or SDS machines.

A: Yes, these bits feature the patented VersaDrive non-slip shank designed for direct integration with 1/2-inch impact wrenches via a VersaDrive impact adapter. This connection prevents chuck slippage, absorbs high torsional shock loads, and allows fabricators to drill rapid holes on site without dragging heavy magnet drills or cables.

A: TurboTip bits are engineered to drill through structural steel plate and section material up to the working depth of the step. The stepped geometry breaks up the swarf load, preventing bit binding and delivering up to five times faster drilling speeds compared to conventional jobber HSS twist drills.

A: Keep the flutes clean of compacted swarf and inspect cutting edges for micro-chipping after heavy site use. Always apply dedicated thread-cutting fluid or paste during drilling. Store the bits inside the provided heavy-duty case to protect the precision-ground TurboTip cutting geometry from contact damage during transport.

As an Official UK Stockist, Express Weldcare provides genuine HMT equipment with expert technical backup and fast despatch.