HPE Aruba JL677A Networking CX 6100 24G Class4 PoE 4SFP+ 370W Switch
DifferentiatorClass 4 PoE/PoE+
Power consumptionMax. Power (w/o PoE): 32.7W
Max. Power (w/ PoE): 455W
Input voltage100–127 VAC / 200–240 VAC
Ports24 x 10/100/1000BASE-T ports
4 x 1G/10G SFP ports
Supports PoE standards IEEE 802.3af, 802.3at
1 x USB-C console port
1 x USB Type-A host port
Latency1 Gbps: 1.5 μSec , 10 Gbps: 1.8 μSec
Switching capacity128 Gbps
Throughput95.2 Mpps
Memory and processorCPU: Dual-core Arm® Cortex®-A9 @ 1016 MHz
Memory: 4 GB DDR3
Flash: 16 GB eMMC
Power supplyFixed power supply
PoE capability370W Class 4 PoE/PoE+
Operating temperatureMaximum of 32°F to 113°F (0°C to 45°C) up to 5000 ft (1.5 km) derate by 1°C for every 1000 ft (305m) from 5000 ft (1.5 km) to 10000 ft (3.0 km)
Management featuresManagement flexibility with support for HPE Aruba Networking Central, easy-to-use Web GUI, CLI, and HPE Aruba Networking Switch Multi-Edit Software
Entry-level Layer 2 access switches
The HPE Aruba Networking CX 6100 Switch Series offers gigabit connectivity with high-speed uplinks and optional PoE to provide entry-level, reliable, and convenient wired access connectivity for enterprise branch office and SMB networks.
The switch series delivers a simple, consistent operator experience with the HPE Aruba Networking CX Switch Operating System (AOS-CX) used across HPE Aruba Networking CX switching platforms.
It has fully-managed enterprise-class switches deliver Layer 2 capabilities with support for static routing, access control lists (ACLs), robust quality of service (QoS), traffic prioritization, sFlow®, and IPv6.
The CX 6100 series provides right-size deployment with choice of 12, 24, and 48-port 1U models with convenient built-in 1/10GbE uplinks and up to 740W of Class 4 PoE.
It simplifies ownership with no switch software licensing or subscriptions required.
AI-ready performance and power
The HPE Aruba Networking CX 6100 Switch Series is designed with a dedicated ASIC that delivers very low latency, increased packet buffering, and adaptive power consumption needed for AI, Wi-Fi 7, and Internet of Things (IoT) requirements.
It has up to 740W IEEE 802.3at Class 4 PoE with up to 30W per port supports newer Wi-Fi 7 and PoE devices.
The four built-in wire speed 1/10GbE uplinks mitigate bottlenecks at the access layer where users and devices connect.