BEK-FIX® 2MM NUMBER PLATE STICKY PADS

10 HEAVY DUTY DOUBLE-SIDED ADHESIVE PADS

A strong, clean and simple way to securely fit your number plate without drilling holes or using screws.

10 PADS • 2MM THICK • 90MM × 20MM

Designed specifically for number plate fitting, these BEK-FIX® foam adhesive pads provide a strong, durable bond while the 2mm foam helps compensate for minor differences and imperfections between mounting surfaces.


WHY CHOOSE BEK-FIX®?

✓ EXTRA STRONG ADHESIVE
High-tack double-sided adhesive designed for a secure, lasting hold.

✓ 2MM THICK FOAM
Extra cushioning helps compensate for minor surface imperfections and provides a little more clearance than thin fixing pads.

✓ WEATHER RESISTANT
Designed to withstand normal UK driving conditions including rain, sun, frost and car washing.

✓ NO DRILLING OR SCREWS
Get a clean, professional-looking installation without drilling holes through your number plate.

✓ EASY PEEL & STICK
The red release liner includes a convenient pull tab to make application quick and straightforward.

✓ PRECISION CUT
Consistent pre-cut pads ready to use straight from the pack.


WHAT YOU GET

10 × BEK-FIX® Number Plate Sticky Pads

Each pad measures:

90mm × 20mm × 2mm

Length × Width × Thickness

10 pads provide a convenient quantity for fitting one standard number plate.

The number of pads required may vary depending on plate size, vehicle and mounting surface.


WHY 2MM THICK?

The foam layer provides additional cushioning between your number plate and the vehicle.

This can help accommodate minor surface irregularities, absorb vibration and provide a strong mounting surface.

It's a great all-round thickness when you want more cushioning than an ultra-thin pad without moving up to an oversized extra-thick fixing.


QUICK & EASY TO FIT

1. CLEAN

Thoroughly clean and dry both the rear of the number plate and the vehicle mounting surface.

Remove all:

Dirt • Grease • Wax • Polish • Silicone • Moisture

2. POSITION

Decide where the pads will sit on the rear of the plate.

Space them evenly to provide balanced support.

3. STICK

Remove the first liner and press each pad firmly onto the rear of the number plate.

4. PEEL

Use the pull tabs to remove the red protective liners.

5. PRESS

Carefully position the plate on the vehicle and press firmly and evenly over each pad.


IMPORTANT FITTING ADVICE

For best adhesion, fit to clean, completely dry surfaces.

We recommend applying at temperatures of approximately 10°C or above. Avoid fitting to very cold, wet or frozen surfaces.

Once positioned, press firmly to establish good initial adhesive contact.

Position carefully before final contact — these pads are designed for a strong bond and should not be repeatedly removed and repositioned.


SUITABLE FOR

🚗 Cars
🚐 Vans
🚙 4x4s
🛻 Motorhomes
🚚 Commercial Vehicles
🏁 Replacement Number Plates


BEK-FIX® — THE BRAND THAT STICKS

Premium number plate fixing products from a trusted UK brand.

UK Stock • Fast Dispatch

10 PADS | 2MM THICK | 90MM × 20MM

PEEL • STICK • PRESS • DONE