See pictures for an example of what you will receive.
One (1)
O.E.M. Original Equipment Manufacturer Factory
remote keyless entry fob alarm controller
Transmitter control clicker keyfob controller replacement
|
FCC ID: HYQ1512P Part #: 89742-33100 Canada: 1551 102 1999 RSS 210 4 Buttons: Lock / Unlock / Trunk / Panic See Item Specifications for more details
|
|
Compatible Vehicle’s 1997 1998 1999 2000 Lexus ES300 |
|
Programming To begin with, the vehicle should be as follows - The key is not inserted in the ignition key cylinder - Driver's door is OPEN (other doors are CLOSED) - Driver's door is UNLOCKED
1. Insert the key into the ignition key cylinder, then remove it. 2. Within 40 seconds: Using the door control switch (for manual operation) move the switch 5 times to LOCK/UNLOCK at approximately 1 second intervals (so in this step, hit the lock button on the driver's door, then the unlock button a second later, and repeat 5 times) 3. Close the driver's door, then open it 4. Repeat step 2, again within 40 seconds 5. Insert the key into the ignition cylinder 6. Turn the ignition switch (the key) from ON to LOCK at approximately 1 second intervals for 1 - 5 times, depending on which mode..
Add mode - 1 time Rewrite mode - 2 times Confirmation mode - 3 times Erase(Prohibition) mode - 5 times 7. Remove the key from the ignition key cylinder 8a. If add, rewrite, or erase mode have been selected: The car should now lock and unlock the door itself, the number of times depending on which mode you selected. The number will be the same number you used to select the mode. So if you chose add, then the car will lock and unlock once, if you chose rewrite, then the car will lock and unlock twice... 8b. The car will lock/unlock itself at 2 second intervals for each set of code programmed into the car. 9. Press the transmitter switch for at least 1 second 10. The wireless door lock ECU automatically performs LOCK-UNLOCK once at a 1 second interval to inform the technician that it has received the signal from the transmitter 11. Close the driver's door, then open it. 12. Press the transmitter switch for at least 1 second 13. The car will LOCK-UNLOCK one or twice at 1 second intervals. If it LOCK-UNLOCK's once, then the it is completed. If it LOCK-UNLOCK's twice, then it has not been completed because the ECU didn't receive the same code from steps 9 and 12 or when selecting add mode, a recognition code indicating registration completed was already received. |
How to find out if this remote is compatible with your Vehicles’ installed RKE System
If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.
1. Check the back of your current or old keyless remote to match FCC ID /Part #’s.
2. Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.
Your vehicle will be installed with one of the following keyless entry systems:
a. Standard Keyless Remote Packages: Installed at time of manufacture.
b. Optional Keyless Remote Packages: Installed by a dealer.
c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.
d. No remote keyless entry system at all.
The
above information can change which remote you need
for your installed remote keyless system.
Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days
PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.
Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).
100% Guarantee Remote Shipping / Return Policy
Warranty/Returns:
1. We have a 30 day return policy.
2. All returns for replacements and refund need an RMA #.
3. Please contact us before returning items so we can give you the RMA # and the proper return address.
4. No refunds / replacements will be granted without an RMA#
5. All cut keys are subject to a $20 deduction from the refund
We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.
Please Note: Each remote and circuit board is UV ID’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.
Does this keyless remote entry come with a battery?
Yes. It will have a working battery installed.
Battery Condition:
A. All remotes sold on Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply working.
Some are new and some are used.