2X Laisdcc NEM652 8-Pin socket
with hard wiring solder tabs adaptor PCB
YOU GET 2 BOARDS
A DCC NEM652 8-pin adapter breakout PCB is the most effective solution for converting older, analogue model locomotives to digital without hard-wiring the decoder directly
By permanently soldering the train's internal wires to the labeled pads on this small interface board, you create a standard socket
Any standard 8-pin DCC decoder can then be cleanly plugged in and unplugged for quick troubleshooting
warranties preservation, or future upgrades.
Identify Pin 1: Look for a small star, a dot, or a "1" stamped on the PCB to correctly align the orange wire side of the decoder plug
NMRA / NEM652 Wiring Standards
When hard-wiring your locomotive pickups, motor, and lights to the adapter's solder tabs
you must follow the standard color-coded pin configurations
| Pin Number | Wire Color | Locomotive Connection |
|---|---|---|
| Pin 1 | Orange | Motor Left / Right (Terminal 1) |
| Pin 2 | Yellow | Rear Light (Negative) |
| Pin 3 | Green | Auxiliary Function 1 (F1) |
| Pin 4 | Black | Left-hand Rail Track Pickup |
| Pin 5 | Grey | Motor Right / Left (Terminal 2) |
