E6000® is a unique adhesive formulated to meet high-performance industrial requirements, making it an exceptional adhesive for any hobby or craft project.

E6000 has exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry, and concrete. It also adheres strongly to leather, rubber, vinyl, and many plastics. It will not break down or become brittle with temperature extremes.

Use it for costumes, clothing, fabric jewelry and so much more!

For uses with:

• Fabric
• Metal
• Wood
• Glass
• Ceramic

Features:

• Bonds to glass, wood, plastics, tin, metal, ceramic, cement, rubber, vinyl, leather, fabric, and much more 
• Dries clear 
• Photo safe 
• Washer/dryer safe 
• Paintable 
• Temperature resistant 

 

Instructions:
Follow these step-by-step directions when using E6000:

• Read directions and test a small area before use.
• The surface should be clean, dry, and free of dirt. For best results, lightly roughen the surface before use.
  
• Puncture seal in neck of tube using pointer cap. Replace cap. Screw the precision tip into the top of the tube cap. Replace with the fresh tip as needed.
• The ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). However, the fully cured adhesive can withstand temperatures from -40 to 180 ºF (-40 to 82 ºC) intermittently.
• Apply directly to surfaces to be bonded or repaired.
• Allow 24 hours for curing. Depending on materials and temperature, maximum bond strength may not be reached for up to 48 to 72 hours.
• For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
• Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.

Note:

• May damage finished surfaces.
• Avoid such contact until completely dry.
• Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam™, or paper products.
• Not recommended for any items that come into contact with food, drinking water, or animals.
• Do not dry clean.