We are proud to introduce our custom Aluminum Overflow tank that is made to fit inside the rib of a Mishimoto aluminum radiator in your Z car.

Designed for Mishimoto Radiator MMRAD-DATS-70, may fit other radiators. Please check measurements posted below.

*** V1 | V2 | V3 Differences***

• V1 - Standard cap. Ports face the ground. Port 1 connects to radiator cap. Port 2 has a stand tube for max level overflow and breather. Can only be mounted on LH side of radiator.
• V2 - Vibrant Performance Cap. Ports face the ground. Port 1 connects to radiator cap. Port 2 has a stand tube for max level overflow and breather. Can only be mounted on LH side of radiator.
• V3 - Standard cap. One port faces the rear of vehicle. Has a vent hole just below the cap. Can be mounted on LH or RH side of radiator.

This tank is V3. It has one 1/8" NPT Female port welded at the bottom facing the rear of the vehicle. The port connects to the nipple at the radiator cap.

Features:

• TIG Welded 6061 Aluminum
• Billet Aluminum Cap (Raw Machined Aluminum)
• Vented design to avoid pressure build-up
•  1x 1/8" NPT fitting welded at the bottom of the tank
• Capacity: 0.6L /0.64 QT
• Installed using two M6x1.0 hex head screws (included).
• Can fit LH and RH side of the radiator.

**Longer screws may be required if you are using a fan shroud**

• Dimensions: 2" x 2"x 14.5"
• Center to center bolt spacing: 7-7/8" or 200mm

Due to the manufacturing process, some scratches and or surface imperfections may be present.

This unit is custom made to order, please refer to eBay delivery estimated time for information on when you will receive your product or message us for more info.