Lian Li PC-Q25B
This is a monster mini-ITX NAS enclosure in the classic black Lian Li brushed aluminum.
External 3.5" Drive Bays No
Internal 3.5" Drive Bays 3.5" Drive bay x 7 ( Hot swap x 5 )
Internal 2.5" Drive Bays 2.5" Drive bay x 3 (used 3.5" bay)
Hot-Swap Drive Bays 5
Expansion Slots 2
120mm Fans 1 x 120 mm top fan
140mm Fans
1 x 140 mm front fan
Max GPU Length 320 mm
Max CPU Cooler Height 80 mm
Dimensions 14.41" x 7.83" x 11.02"
Five 3.5" SATA hot-swap bays plus two more on the bottom of the case. It can alternatively mount three 2.5" drives on the bottom of the case.
With a 140mm intake fan up front, it has solid cooling capacity and can run quiet. I ran a 45w CPU with two HDDs, three SATA SSDs, and three NVME drives using only the installed Noctua 140mm plus the PSU fan with no noise or temperature problems. If additional cooling is required, there is space for a 120mm fan on top. Note: If you are planning on using 2.5" drives on the SATA cage, I recommend Orico 1125SS adapters (not included).
It takes a standard ATX PSU, although the PSU size may interfere with GPU or other add in cards. I used a Silverstone PSU with 140mm depth to avoid interference.
Two PCI slots - I'm not sure if it can accommodate a DTX motherboard. It should handle a mid range two slot GPU with additional cooling.
It's a Lian Li. It's been in use for 9 years and shows almost no signs of wear. The powdercoat should last another 40 years if you can avoid gouging it with a screwdriver or smashing it with a hammer.
All of the original hardware and fans are included, in addition to the (installed) Noctua, which I believe is a Noctua NF-A14 iPPC-2000 PWM. Ships with the original box protected by a second box.