The technical profile, system role, hardware sub-variations, and MRO procurement landscape for the Muratec (Murata Machinery) M0BD-31iTA Interface Board Array—specifically tracking the HM3-A0200-500 and HM3-A0200-600 sub-assembly metrics—are detailed below:
The M0BD-31iTA is an industrial-grade internal CNC interface and logic communication motherboard engineered by Murata Machinery (Muratec) in Japan.
The Fanuc-Muratec Integration Bridge: The string 31iTA identifies the underlying control system configuration. This card is custom-built to sit directly inside the specialized Fanuc Series 31i-Model A / 31i-TA CNC control chassis that runs Muratec's high-performance machine tools.
Target Machinery Platforms: This interface subsystem is the vital data highway running inside Muratec MT-Series multi-tasking turning centers (such as the MT12, MT20, and MT200 twin-spindle, multi-turret lathes) as well as automated Muratec MW-Series front-turning CNC cells. It bridges the raw Fanuc NC bus execution layers directly to Muratec’s proprietary automated gantry loaders, pallet changers, and part orientation tracking loops.
-500 vs. -600The base M0BD-31iTA motherboard features specific build variations identified by the tracking numbers stamped on the green PCB layers or barcoded labels:
| Module Identifier | Hardware Level Sub-Assembly Role |
| HM3-A0200-500 | Identifies the Primary Logic Motherboard and I/O Daughterboard stack. This serves as the master footprint module that contains the high-density connection pins for the main control rack bus. |
| HM3-A0200-600 | Identifies the Sub-Assembly / Firmware Card Revision layer. This code tracks specialized secondary chip layouts, built-in communication chips, or localized trace routing variations optimized for distinct gantry configuration styles. |
📌 MRO Maintenance Pairing: In many parts depots, these numbers are found stuck to the same complete multi-layer card assembly. The base board holds the
-500structural tracing code, while the specialized attached option daughterboard or factory chip revision maps to the-600identifier block.
Because Muratec multi-turret turning centers operate at high cycles under immense fluid pressure, the internal CNC cabinet components face distinct degradation challenges over time:
Optical and I/O Bus Errors: The main role of this board is to process rapid automated gantry tracking signals. If the I/O handshake fails, it will trigger an immediate "Gantry Communication Error" or "Axis Interlock Trip" on the screen, blinding the machine's automated raw material feeding loop even if the main Fanuc CPU is fine.
Trace Corrosion from Outgassing: Over extended operational lifecycles, vaporized high-pressure cutting oils can bypass degraded electrical cabinet door gaskets. The resulting film migration onto the micro-pins of the -500 or -600 stack will form resistive bridges, causing intermittent logic timing crashes during rapid turret indexing.
The Muratec M0BD-31iTA Interface Board HM3-A0200-500 HM3-A0200-600 is a printed circuit board designed for use in electronic systems. This interface board is manufactured by Muratec, a reputable brand known for producing high-quality electronic components. With the model number HM3-A0200-500 or HM3-A0200-600, this board is likely to be a reliable and efficient component for various circuit applications. Customers can refer to the provided pictures to better understand the design and compatibility of this interface board.
Sold as shown
090925G15