Stock #: 884
This item is pre-owned – it will work like new once programmed to your vehicle
One (1)
Aftermarket remote keyless entry fob alarm
Transmitter control clicker keyfob controller replacement
Functions at 100% Tested & Guaranteed
Code Alarm
|
FCC ID: ELVATDB Part #: DIYTX Interchangeable Part #s:
Frequency: 433 - 434 MHz LED color: Red 4 buttons Battery: (2) CR 2025
|
|
Compatible w/ the following systems: |
|||
|
Code-Alarm CA125 CA135 CA145 CA160 CA500 CA501 CA545 CA645 CA670 CA670A |
Prestige APS55TWT APS590 APS590TWC APS596 APS997 APS996A APS996C |
Pursuit PRO900 PRO9800 |
Other CSI100 CSI200 CSI300 CSI400 |
|
Programming Instructions: Note: You will need to use the valet switch (programming/override button) to perform the programming procedure. It is possible to perform programming without the valet switch but you would need to access the receiver under the dash. 1) Enter the vehicle, and turn the ignition switch to the ON position. 2) Press and release the Programming button switch 3 times. 3) Press and hold the LOCK button of the transmitter you wish to program. 4) The lights will flash 1 time, indicating that the system is accepting the programming of channel #1 which is lock. "Repeat step 3 for each transmitter you wish to program" 5) Press and release the valet push button switch 1 time to advance to channel 2. 6) Press and hold the UNLOCK button of the transmitter you wish to program. 7) The lights will flash 1 time, indicating that the system is accepting the programming of channel #2 which is unlock. "Repeat step 6 for each transmitter you wish to program" 8) Press and release the valet push button switch 1 time to advance to channel 3. 9) Press and hold the TRUNK button of the transmitter you wish to program. 10) The lights will flash 1 time, indicating that the system is accepting the programming of channel #3 which is trunk. "Repeat step 9 for each transmitter you wish to program" 11) Press and release the valet push button switch 1 time to advance to channel 4. 12) Press and hold the STAR button of the transmitter you wish to program. 13) The lights will flash 1 time, indicating that the system is accepting the programming of channel #4 which is remote start. "Repeat step 12 for each transmitter you wish to program" |
100% Guarantee Remote Shipping / Return Policy
We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.
Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.
Does this keyless remote entry come with a battery?
Yes. It will have a working battery installed.
Battery Condition:
A. All remotes sold on Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply working.
Some are new and some are used.
Your vehicle will be installed with one of the following keyless entry systems:
a. Standard Keyless Remote Packages: Installed at time of manufacture.
b. Optional Keyless Remote Packages: Installed by a dealer.
c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.
d. No remote keyless entry system at all.
The
above information can change which remote you need
for your installed remote keyless system.