BOX OF 12 BOX OF 12 BOX OF 12 BOX OF 12

Fix ALL Crystal

„ Substrate preparation

Porous surfaces should be primed with Primer 150. If needed non porous surfaces can be prepared with a Soudal activator or cleaner (see Technical

Data Sheet). While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These

should be removed prior to bonding or sealing.

„ Substrate types

Fix ALL Crystal has a good adhesion to following substrates: all usual building substrates, glass, lacquered wood, PVC, metal, brick, concrete, etc..

Fix ALL Crystal has no good adhesion or is not suitable for PE, PP, PTFE (Teflon®), bituminous substrates, copper or copper containing materials

such as bronze and brass. Bonding plastics like PMMA (e.g. Plexi® glass), polycarbonate (e.g. Makrolon® or Lexan®) in stress loaded applications

can give rise to stress cracking and crazing in these substrates. The use of Fix ALL Crystal is not recommended in these applications. We recommend

a preliminary adhesion and compatibility test on every surface.

Application method

„ Application method

Apply the product by means of a manual-, battery- or pneumatic- caulking gun. Apply the product evenly without air inclusions into the joint.

Smoothen the joint with a spatula with the help of finishing solution. Avoid that finishing solution comes between the joint edges and sealant (to

prevent adhesion loss). Bonding: Apply the adhesive by means of a caulking gun in equal beads or dots on one of the materials that have to be

bonded. Always apply a bead on the edges of the substrates and on edges and corners of panels. Press the substrates together before skin formation

and batten down with a rubber hammer. Support if needed.

„ Cleaning method

Clean with Soudal Surface Cleaner or with Soudal Swipex Wipes, immediately after use. Cured product can only be removed mechanically.

„ Finishing method

With Finishing Solution before skinning.

„ Repair method

Repair with Fix ALL Crystal.

Health- and Safety Recommendations

Take the usual labour hygiene into account. Consult the packaging label and safety data sheet for more information.

Keep the area well ventilated during use and curing of the product.

Packaging/Logistics

Colour: Transparent

Packaging: Please consult the product catalogue, the Soudal website or a Soudal representative.

Shelf life: 15 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C, Once opened the product has

only a limited shelf life.

Standards and certificates

„ FDA regulation code CFR 21 paragr. 177.2600 (e) for repeated use in contact with aqueous foods.

„ Declaration of compliance ISEGA - Tested for use in foodstuffs-related area.

Joint dimensions

„ Min. width for bonding: 1 mm

Min. width for joints: 5 mm

Max. width for bonding: 3 mm

Max. width for joints: 10 mm

Min. depth for joints: 5 mm

Technical datasheet

Fix ALL Crystal Master Code: 9900181

Revision: 08-05-2026

Page: 2 - 3

Soudal