Multi‐purpose, high modulus, acetoxy cure silicone sealant with fungicide, suitable for most sealing jobs around

the home. Conforms to BS EN 15651‐1,3:2012.

Features & Benefits:

w Contains fungicide.

w Mould resistant.

w Fast setting.

w For interior and exterior use.

w Permanently flexible.

Uses

Bond It GP200 is suitable for sealing and waterproofing in areas of

high humidity. It has excellent adhesion to glass, glazed surfaces,

ceramic tiles, many plastics and most paints.

It is ideal for the following applications - kitchen work tops,

bathrooms, showers, utility rooms and general DIY applications.

Limitations

Where bare ferrous metals, brass copper, lead, aluminium or zinc

cannot be primed, use Bond It ULTI-MATE silicone sealant. Do not

use on surfaces where water can penetrate through porous

materials to bond interface without first carrying out remedial

work. Not suitable for fixing of mirrors or sealing natural marble.

Notsuitable for use on bitumen or asphalt. White and trans may

yellow in colour over time if exposed to direct sunlight.

Preparation

Ensure all surfaces are clean, dry and free from grease or

any contaminants that may hinder adhesion. For best

results on movement joints, Bond It EXPANDING FOAM is

recommended as a backing material, or a suitable backing

tape or rod. All cements, concretes and bare metal surfaces

should be primed prior to the application of the silicone.

Timber should be primed and painted.

Application

Apply using a standard sealant gun with the

nozzle cut at an angle of 45°, and to an

opening slightly larger than the joint to be

sealed. Tool using a stick, plastic spatula or

Bond It SEALANT APPLICATOR TOOL wetted with

soapy water. Do not apply to wet surfaces, although

wetting immediately afterwards will not have any

adverse effects. Tools can be cleaned in Bond It

WHITE SPIRIT or MULTI-WIPES prior to curing taking place.

Maintenance

Resistant to all common household cleaning chemicals. In showers

and bathrooms best results are obtained with a weekly clean to

prevent organic build up. Stains can be removed with commercial

bleach.

Coverage

Depending upon substrate condition and porosity approximately

10 linear metres with a 6mm bead per cartridge.

Colour

brown.

GP200 comes in 5 colours: white, black, translucent, grey and

Size

EU3 plastic cartridge and 400ml foils in white & trans.

Shelf Life

Minimum 12 months from date of manufacture when stored in

original, unopened cartridges.

Storage Conditions

Store in cool, dry conditions at a temperature between +5oC and

+25oC. Protect from frost and direct sunlight.

Disposal of Containers

Do not leave empty containers where residue could be harmful to

children, animals or the environment. Remove any containers to a

central disposal point in accordance with local regulations.

Health & Safety

Please refer to separate safety data sheet (SDS) for full handling,

use and storage instructions. Keep out of reach of children.

It is the user’s responsibility to determine suitability for

use. If in doubt, contact our Technical Department for

advice.

Note: this information is for general guidance only, since site