This is an antique Ansonia #5 clock open escapement movement, with ruby jeweled pallets, for a slate or marble clock with pendulum, hands, and key. This movement is not made or intended for a porcelain, cast iron, or wooden clock.    

This movement includes the hands, pendulum, and key.  It has been timed correctly to match the pendulum. Dial is complete with clean glass, has no chips, original w/ beveled edge. This dial and movement come from the same clock and are a matching pair.  Pendulum bob is original. Hands are original.  The 2 ruby pallets are original.

This is a #5 movement. This number is stamped into the brass on the rear of the movement.  The needed distance from the center of the dial to top of the sound board is 5 1/2" This is to accommodate the length of the pendulum. The movement fits into a hole on the front of the clock that is 4 1/4" to 4 1/2" in diameter and this marble faceplate of the clock is 1/2" thick.

This movement has been disassembled, repaired, and ultrasonically cleaned. New main springs installed. Movement repaired with new bushings. This also has a new suspension spring. Running great.  Dial has been cleaned.  Comes with the 3 screws for mounting the dial and movement to the clock.  The last photo shows an Ansonia marble faceplate and how it should look.

All of my restored mantel clock movements are completely disassembled, cleaned, repaired, timed and checked for 2 weeks minimum.  They also come with the pendulum, key, and hands. 

The following measurements were taken “Center to Center” 

Distance between 2 winding holes is 2 3/4". 

Distance between winding hole and center is 1 3/4".

Distance between center and fast/slow adjustment is 2 1/8".

Clearance needed from hand shaft to bottom of pendulum is approx. 5 1/2”

If you are replacing a movement, note the position of the hammer that strikes your gong. 

My movements also come with instructions on how to set the beat once you install it in your clock. Plus, I give other info on troubleshooting.  You also get my contact info in case you have any questions, problems, or concerns. 

I'll be happy to work with you if you have any problems.

If you have a complete movement and wish to have it rebuilt, I can do this.  Please send me a photo of your movement. I only do early American movements like Ansonia, Gilbert, Ingraham, Waterbury, New Haven, Seth Thomas, and Sessions.  I will let you know what it will cost to rebuild your movement and I will put a listing on eBay for this service.  Once purchased, I will then be able to send you my contact info.  My turnaround time for this service is usually 2-3 weeks.  This includes new mainsprings, all bushing work needed, the repair of any broken parts, and return shipping. Let me know if you have any questions. I also restore dials.

 Please ask any questions before purchasing.  Shipping to 48 U.S. only.  Thanks!  And please see my other listings.