Set 8 42lb 440ccm Fuel Injectors Fits for Ford Mustang 5.4L V8 Corvette BMW 4.8L
Injector 0280150558 0280155968
Please check the picture and the OE part number carefully to make sure that you bought the right part for your car.The only way to be 100% sure that the part will fit your vehicle is to check your original part,You can also email us before purchasing, we will check for you and reply soon within 24 hours.
Feature:
1) All parts are hand inspected off the line before packaging and once again by our team before shipment.
2) According to the original factory specifications.
3) Perfect match for the original car.
4) Easy installation.
5) Stable characteristics, high reliability.
6) Aftermarket Products with Premium Quality.
Please check your part number or photos before purchasing !
1) All parts are hand inspected off the line before packaging and once again by our team before shipment.
2) According to the original factory specifications.
3) Perfect match for the original car.
4) Easy installation.
5) Stable characteristics, high reliability.
6) Aftermarket Products with Premium Quality.
Please check your part number or photos before purchasing !
OE Part Number:
0280150558, 0280 150 558
0280155968, 0280 155 968
0280155968, 0280 155 968
Packing Included:
8 X Fuel Injectors
As Picture Shows
Fitment For:
Fit for Ford Linghtning 1999-2004
Fit for Ford Mustang GT, LX and Cobra 5.0L 1986-1995
Fit for Ford Mustang GT 1996-2004
Fit for Ford Mustang Cobra (Must change injector plugs) 1999-2001
Fit for Ford Mustang Math I (Must change injector plugs) 2003-2004
Fit for Ford Mustang Cobra (Must change injector plugs) 2003-2004
Fit for Chevrolet Camaro 1985-2002
Fit for Chevrolet Corvette 1985-2004
Fit for Chevrolet Impala 1994-1996
Fit for Pontiac Firebird 1985-2002
Fit for Pontiac GTO 2004-2006
Fit for Pontiac TransAm 1985-2002
Fit for Chevrolet Camaro (Must change injector plugs) 2010-2013
Fit for Chevrolet Corvette (Must change injector plugs) 2005-2013
Fit for Ford Mustang GT, LX and Cobra 5.0L 1986-1995
Fit for Ford Mustang GT 1996-2004
Fit for Ford Mustang Cobra (Must change injector plugs) 1999-2001
Fit for Ford Mustang Math I (Must change injector plugs) 2003-2004
Fit for Ford Mustang Cobra (Must change injector plugs) 2003-2004
Fit for Chevrolet Camaro 1985-2002
Fit for Chevrolet Corvette 1985-2004
Fit for Chevrolet Impala 1994-1996
Fit for Pontiac Firebird 1985-2002
Fit for Pontiac GTO 2004-2006
Fit for Pontiac TransAm 1985-2002
Fit for Chevrolet Camaro (Must change injector plugs) 2010-2013
Fit for Chevrolet Corvette (Must change injector plugs) 2005-2013
All injectors are serviced as stated below:
OHM Tested for electrical shorts
Disassembled and externally cleaned
Checked for any major cosmetic damage
Internally cleaned via numerous ultrasonic baths using special non-hazardous solutions.
Back-flushed to remove any internal debris (multi-step process)
Pressure/Leak tested, Spray/Flow Tested
Flow matched using the very latest in fuel injection calibrating technology
Carefully packaged to ensure safe arrival
Disassembled and externally cleaned
Checked for any major cosmetic damage
Internally cleaned via numerous ultrasonic baths using special non-hazardous solutions.
Back-flushed to remove any internal debris (multi-step process)
Pressure/Leak tested, Spray/Flow Tested
Flow matched using the very latest in fuel injection calibrating technology
Carefully packaged to ensure safe arrival
Specification:
Condition: 100% brand new and superior quality
Material: Metal & plastic
Connector Type: EV1
Coil Resistance: 12 Ohms / high impedance
Static Flow Rate: 42 lb/hr = 400cc / min at 43.5 PSI
Gain: 0.12ms / MG
Offset: 0.055ms
Turn on Time @ 14VDC: 1.14ms
Turn off Time: 0.85ms @ 300KPa
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Length: 3" (76mm)
O-rings: Preinstalled
O-rings Diameter: 14mm
Length of the Middle Part: 25mm
Height of the Middle Part: 24mm
Size Details: As pictures shown
Mounting Type: 2 Pins
Injector Nozzle: 4-Hole dic
Material: Metal & plastic
Connector Type: EV1
Coil Resistance: 12 Ohms / high impedance
Static Flow Rate: 42 lb/hr = 400cc / min at 43.5 PSI
Gain: 0.12ms / MG
Offset: 0.055ms
Turn on Time @ 14VDC: 1.14ms
Turn off Time: 0.85ms @ 300KPa
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Length: 3" (76mm)
O-rings: Preinstalled
O-rings Diameter: 14mm
Length of the Middle Part: 25mm
Height of the Middle Part: 24mm
Size Details: As pictures shown
Mounting Type: 2 Pins
Injector Nozzle: 4-Hole dic
Attention:
Please check our photos very carefully to make sure the photos shown are the same as you want.
Please compare the part number with the original part before purchasing!
We will not pay your installation fee or return shipping fee due to incompatibility!
If the item does not work properly, please contact our customer service before opening the case via e-bay or pay-pal.
When you need to return, exchange and refund, please contact us first. Any direct returns of purchased items will not be processed.
