IMPORTANT NOTE: Please check the model number carefully before ordering.If you don't confirm if it fits or not,please send me your machine model number,I would be very happy if I could help you.

Part number DE81-09947A replaces AP7031153, 72020, DO130, 62812, 72027, 82124.

Compatible Brands are Dacor and Samsung:
CPD230, CPO130, CPO230, CPS130, CPS230, DO130, DO230, ECD230, ECPD230, ECPS130, ECPS230, ECS130, ECS230, EGR30, EORD230B, EORD230SCH, EORS130B, EORS130SCH, EORS230B, EORS230SCH, ERD30S06LP, ERD30S06LPH, ERD30S06NG, ERD30S06NGH, ERSD30, ERSD30LP, ERSD30LPH, ERSD30NG, ERSD30NGH, MCD230, MCS130, MCS230, MORD230B, MORD230S, MORS130B, MORS130S, MORS230B, MORS230S, MRE30S, MRES30S, W305.  


Installation Steps

Step 1: Turn Off the Oven and Unplug it.
For safety reasons, be sure to disconnect the oven from the power source before performing any repairs. If you are unsure about this step, we recommend contacting a professional repair technician.

Step 2: Locate the Door Seal.
Open the oven door; the gasket is typically located around the door frame or the opening where the door meets the oven body. Carefully inspect the edges of the door frame.

Step 3: Remove the Old Seal.
Carefully remove any loose, dirty, or damaged gaskets from the oven door.

Step 4: Clean the Area Around the Seal.
Once the old gasket has been removed, take the time to clean the area where the gasket sits. Carefully remove any grease, debris, or food particles, ensuring the groove is clean and dry.

Step 5: Install the New Oven Door Seal.
Starting at the top corner of the oven door, align the gasket with the oven groove and press it into place. Slowly press the new gasket into the groove. Ensure the seal is evenly distributed along the entire perimeter.

Step 6: Check for Proper Fit.
After installing the gasket, ensure it is properly aligned with no twisting, bulging, or loose sections. Close the oven door to verify the fit. The door should seal tightly with no gaps along the edges. If you notice any areas where the seal is uneven, reopen the door and adjust the gasket as needed.

Step 7: Restore power to the oven.
Once the new gasket is installed and the door closes properly, plug the oven back in.