LittleBee BLHeli-S 30A ESC DSHOT Speed Controller For FPV Racing Quadcopter
2pcs LittleBee BLHeli_S 30A ESC DSHOT Speed Controller For FPV Racing Quadcopter
Features:
LittleBee BLHeli_S Spring 30A ESC BLHeli_S have all the performance you would hope for and the same tiny size as the DYS BL30A. You will struggle to find a frame small enough to fit these ESCs and they will still give you plenty of headroom on a standard 250 size quad!
Dshot
Dshot is a different and faster communication protocol between the flight controller and the ESC on your quadcopter. It allows the FC to send control commands to the motor quicker, therefore in theory your multirotor should perform better.
Damped mode:This feature allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.
Easy upgrades:With the BLHELI software rapidly evolving, you can flash the lastest firmware using the 3pin connector and suitable USB adapter and now can be used via the cleanflight GUI please note you will need to be running the Betaflight firmware to connect via the cleanflight interface but this is a simple way of adjusting and tweaking the settings of your escs.
Specifications:
Item name: LittleBee BLHeli_S SPRING 30A ESC
Input Voltage: 2-6S Lipo
BEC Output: No
Continue Current: 30A, Burst Current: 35A up to 10S
Size: 35*17mm
Weight: 9g(include Power and signal wire)
Support Damped mode, Oneshot125, Oneshot42 ,Multshot and DSHOT
Main IC: SILABS EFM8BB21F16, MCU run 48MHz
MOS: Both low and high side fets are Nfets
Switching speed is very fast, it has dedicated driver chip
BLHeli_S Bootloader andamp; Firmware
What's included:
2 pcs LittleBee BLHeli-S SPRING 30A ESC
Features:
LittleBee BLHeli_S Spring 30A ESC BLHeli_S have all the performance you would hope for and the same tiny size as the DYS BL30A. You will struggle to find a frame small enough to fit these ESCs and they will still give you plenty of headroom on a standard 250 size quad!
Dshot
Dshot is a different and faster communication protocol between the flight controller and the ESC on your quadcopter. It allows the FC to send control commands to the motor quicker, therefore in theory your multirotor should perform better.
Damped mode:This feature allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.
Easy upgrades:With the BLHELI software rapidly evolving, you can flash the lastest firmware using the 3pin connector and suitable USB adapter and now can be used via the cleanflight GUI please note you will need to be running the Betaflight firmware to connect via the cleanflight interface but this is a simple way of adjusting and tweaking the settings of your escs.
Specifications:
Item name: LittleBee BLHeli_S SPRING 30A ESC
Input Voltage: 2-6S Lipo
BEC Output: No
Continue Current: 30A, Burst Current: 35A up to 10S
Size: 35*17mm
Weight: 9g(include Power and signal wire)
Support Damped mode, Oneshot125, Oneshot42 ,Multshot and DSHOT
Main IC: SILABS EFM8BB21F16, MCU run 48MHz
MOS: Both low and high side fets are Nfets
Switching speed is very fast, it has dedicated driver chip
BLHeli_S Bootloader andamp; Firmware
What's included:
2 pcs LittleBee BLHeli-S SPRING 30A ESC
