Do You Bothered By The Following Problems?
More fuel consuming? Faster idling speed? Water Leaks? Hard to find the leaks? Supports multi-system testing
EVAP System Test Intake System Test Exhaust Systems Test Crankcase system test Car Sealing Test Fuel Tank System Test Turbo System Test Various Pipe Fittings Test Overheat & Anti-frost Protection
Overheat Protection When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off. Anti-frost Protection The device can also work normally at -20℃. Wide Range of Applications
Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with auto diagnostic tool, you can find the vehicle problem accurately and diagnose fault. How to do leakage test?
Step 1: Fill in 10ml-20ml test oil (baby oil) to the detector Step 2: Connect the delivery house to the detector Step 3: Disconnect the pipe that needs to be connect with the detector Step 4: Connect detector with DC12V battery,device starts to work Step 5: The pipe will be filled with smoke,check the leak points Operation Caution:
1. When you use this Car Smoke Leak Detector for the first time, fill with 20ml oil . Please be careful NOT to beyond this range. 2. The testing liquid : both liquid paraffin and baby oil are OK. (seller not provide, need buyer extra purchase it) 3. Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time. 4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly. 5. During the process of leak detection, please keep away from smoke-sensitive parts. 6. Do NOT run the detector over 8 minutes continuously. It needs interval rest. 7. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later. 8. The round part of this detector has temperature, please be careful to avoid burns. 9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple. Specification
Packing List:
ANCEL S100 Packing List
ANCEL S200 Packing List
ANCEL S300 Packing List
ANCEL S300 Lite Packing List:
ANCEL S3000 Packing List
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
