ANCEL PB100 PB500 PB600 Power Circuit Probe Tester Kit Automotive Circuit Tester
 

About ANCEL PB50---13FT

Car Circuit Tester Inspection Tool Automotive Power Circuit Probe Kit 12V 24V Electrical System Mechanical Works Tool
With the PB50 probe tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test components and circuits without having to break out the old alligator clips and jumper wires. You can power or ground a circuit directly through the top of the device.

ANCEL PB50 Product Function:
There are four modes to diagnose the electrical systems, which can be accessed by depressing the Mode Button and cycling through each one.
✔️DC voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolution of 0.1 volt.

✔️AC voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the Max. voltage, the Min. Voltage and frequency.

✔️Resistance
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.

✔️Diode
In this mode, the probe tip contact the positive terminal of the diode, connect the auxiliary ground lead to the negative terminal of the diode, the screen will display the forward voltage drop, indicates the forward bias. If exchange the probe tip and auxiliary ground lead, the screen will not display the voltage, indicates the reversebias.

 

About ANCEL PB100---20FT
With the PB100 probe tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test components and circuits without having to break out the old alligator clips and jumper wires. You can power or ground a circuit directly through the top of the device.

ANCEL PB100 Electrical System Circuit Tester Functions:

1. Power injection, measuring, ground testing, polarity checking, continuity testing and component activation.
2. Read the AVO meter, voltage, current, and resistance.
3.Energize the electrical components, such as the cooling fan, relay etc.
4. Activate the components
5. Determine the positive, negative and open circuit.
6. Test the bad ground contacts, follow and locate short circuits without wasting the fuse.
7. Test the continuity of the power switch, relay and diode.
8. Protect the tool from overload.
9. Allow you to work in the dark area by using the built-in head light.
10. Test along the vehicle by the long cable.

Two power supply methods.
Powered by vehicle battery or cigarette lighter, Compared with other circuit testers that only use car battery power, PB100 provides more choices and is more convenient to use.

ANCEL PB100 Product Function:

There are four modes to diagnose the electrical systems, which can be accessed by depressing the Mode Button and cycling through each one.
✔️DC voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolution of 0.1 volt.

✔️AC voltage
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the Max. voltage, the Min. Voltage and frequency.

✔️Resistance
While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.

✔️Diode
In this mode, the probe tip contact the positive terminal of the diode, connect the auxiliary ground lead to the negative terminal of the diode, the screen will display the forward voltage drop, indicates the forward bias. If exchange the probe tip and auxiliary ground lead, the screen will not display the voltage, indicates the reversebias.

ANCEL PB100 Package
1 x PB100 Circuit Probe
1 x Extension Cable (20ft)
1 x Battery Hookup Clips
1 x Cigarette Lighter Adapter
1 x Protective Case
1 x Probe tip
1 x User's Manual

About ANCEL PB500---20FT
Ancel PB500 Power Scan Kit is the most revolutionary circuit tester to date, working with 12-24 volt sources and providing DC voltage, AC voltage, Frequency, Duty Cycle, Injector Circuit, Resistor and Diode detection functions. Specifically in AC voltage, Frequency, Duty Cycle and Inject mode, the user can switch between waveform display mode and digital display mode by long pressing the mode button. The PowerScan is indeed the ultimate in performance and affordability, allowing the user to check circuits in a single step. An absolute must for any technician looking for a fast and accurate solution for diagnosing electrical systems.

ANCEL PB500 Electrical System Circuit Tester Functions:

✔️ Diagnose 12 ~24V automotive electrical systems swiftly and accurately.
✔️ Show battery voltage reading and help user determine circuit polarity immediately after connecting the KM50 clips to the vehicle battery.
✔️ Test DC Voltage, AC Voltage, Frequency, Duty Cycle, Fuel Injection Circuit, Resistance, and Diode. Especially, in AC Voltage, Frequency, Duty Cycle and Fuel Inject Modes, user can long press the mode button for 3 seconds to switch between Waveform Display Mode and Digital Display Mode.
✔️ Activate electrical components and test their functions without jumper leads – by depressing the rocker switch to conduct a positive or negative battery current to the tip so as to power up electrical components.
✔️ Test bad ground contacts instantly without performing voltage drop tests.
✔️ Help user to follow and locate short circuits without using external fuses.
✔️ Test continuity with the assistance of its auxiliary ground lead.
✔️ The tool is short-circuit protected. If it becomes overloaded, Its internal circuit breaker will trip to protect the instrument from overload.
✔️ When the circuit breaker is tripped, the tool will NOT be able to conduct battery current to the tip even when the rocker switch is pressed; however, all other functions of the tool are still active, which means you can still probe a circuit and observe the voltage reading.

ANCEL PB500 has 7 test modes:

DC Voltage, 
AC Voltage, 
Frequency, 
Duty Cycle, 
Fuel Injection Circuit Detection, 
Resistance, 
Diode.
Especially, in AC Voltage, Frequency, Duty Cycle and Fuel Inject Modes, user can long press the mode button to switch between Waveform Display Mode and Digital Display Mode.

2 Forms Display Mode
To switch Waveform Display Mode and Digital Display Mode. (In AC Voltage, Frequency, Duty Cycle and Fuel Inject Modes)

Product Specifications

➤ Electrical Specifications
● Supply Voltage 8V DC ~ 30V DC
● DC/ AC Voltage Test -110V ~ 110V
● Frequency 0Hz ~ 1Mhz
● Duty Cycle 0.0~100.0%
● Fuel Injection Voltage: 0~180V, Time: 0~25ms
● Resistance 0~1MΩ
● Diode Germanium diode, silicon diode
● Rating Current 1A~8 A

➤ Instrument Trip Time:
● 8 Amps: Hold > 1 hour.
● 12 Amps: current: trip in one hour.
● 16 Amps: current: trip in 3-30 seconds.
● 24 Amps: current: trip in 0.5-4.0 seconds

➤ Tool Specifications
● Display TFT color display (160x128 dpi )
● Operating Temperature -10 ~ +60℃ ( 14 ~ 140℉)
● Storage Temperature -20 ~ +70℃ (-4 ~ 158℉ )
● Dimensions (L*W*H) 200mm*52mm*39mm
● Net Weight 1.2Kg

ANCEL PB500 Packing List：
1pc Vehicle Super Probe
1pc Probe Tip
1pc Crochet Hook
1pc Crochet Hook Extension Cable
1pc Battery Clamp Cable
1pc User’s Manual
1pc Rugged Blow Molded Case

About ANCEL PB600--30FT
Ancel PB600 Power Scan Kit is the most revolutionary circuit tester to date, working with 12-24 volt sources and providing DC voltage, AC voltage, Frequency, Duty Cycle, Injector Circuit, Resistor and Diode detection functions. Specifically in AC voltage, Frequency, Duty Cycle and Inject mode, the user can switch between waveform display mode and digital display mode by long pressing the mode button. The PowerScan is indeed the ultimate in performance and affordability, allowing the user to check circuits in a single step. An absolute must for any technician looking for a fast and accurate solution for diagnosing electrical systems.

ANCEL PB600 Electrical System Circuit Tester Functions:

✔️ Diagnose 12 ~24V automotive electrical systems swiftly and accurately.
✔️ Show battery voltage reading and help user determine circuit polarity immediately after connecting the KM50 clips to the vehicle battery.
✔️ Test DC Voltage, AC Voltage, Frequency, Duty Cycle, Fuel Injection Circuit, Resistance, and Diode. Especially, in AC Voltage, Frequency, Duty Cycle and Fuel Inject Modes, user can long press the mode button for 3 seconds to switch between Waveform Display Mode and Digital Display Mode.
✔️ Activate electrical components and test their functions without jumper leads – by depressing the rocker switch to conduct a positive or negative battery current to the tip so as to power up electrical components.
✔️ Test bad ground contacts instantly without performing voltage drop tests.
✔️ Help user to follow and locate short circuits without using external fuses.
✔️ Test continuity with the assistance of its auxiliary ground lead.
✔️ The tool is short-circuit protected. If it becomes overloaded, Its internal circuit breaker will trip to protect the instrument from overload.
✔️ When the circuit breaker is tripped, the tool will NOT be able to conduct battery current to the tip even when the rocker switch is pressed; however, all other functions of the tool are still active, which means you can still probe a circuit and observe the voltage reading.

PB600 - Upgrade of PB500
PB600 has Fuel Injector Testing, Frequency Testing, Duty Cycle Testing, and Display Forms: Waveform. 

ANCEL PB600 has 8 test modes:
Especially, in AC Voltage, Frequency, Duty Cycle and Fuel Inject Modes, user can long press the mode button to switch between Waveform Display Mode and Digital Display Mode.

2 Forms Display Mode
To switch Waveform Display Mode and Digital Display Mode. (In AC Voltage, Frequency, Duty Cycle and Fuel Inject Modes)

PB600 Can do:

1) Diagnose 12 ~24V automotive electrical systems swiftly and accurately. Connect the battery clips to the vehicle battery and the tester will be powered up, without the need for additional power supply.

2) Test DC Voltage, AC Voltage, Frequency, Duty Cycle, Resistance, Diode, Fuel Injection, Relay and Vehicle Battery. Especially, in AC Voltage, Frequency, Duty Cycle and Fuel Injection tests, user can press the OK button to switch between Waveform Display Mode and Digital Display Mode.

3) Activate electrical components and test their functions without jumper leads –by using Component Test to conduct a positive or negative battery current into the tester probe tip so as to power up electrical components. 

4) Test bad ground contacts instantly without performing voltage drop tests due to short circuit protection. 

5) Help user to follow and locate short circuits without using external fuses. 

6) Test continuity with the assistance of its auxiliary ground lead. 

7) The tool is short-circuit protected. If it becomes overloaded, its internal circuit breaker will trip to protect the tester from overload.

8) When the circuit breaker is tripped, the tool will NOT be able to conduct battery current to the tester probe tip even when a certain function button is pressed (After approx. 10~15 seconds, the function will automatically resume); however, all other functions of the tester are still active, which means you can still probe a circuit and observe the voltage reading.

Product Specifications

(1)Tool Specifications
Display : 2.4 inch TFT (320*240 DPI )
Operating Temperature  :-20℃( -4℉) to 50℃ ( 122℉)
Storage Temperature  :-40℃( -40℉) to 65℃ ( 149℉)
Dimensions (L*W*H) :228*80*32mm

(2) Electrical Specifications 
Supply Voltage DC: 8V ~ 35V 
DC/ AC Voltage Test :-110V ~ +110V (True RMS Measure)
Frequency :0Hz ~ 1Mhz
Duty Cycle :0.0%~100.0%
Fuel Injection :Voltage: 0~180V, Time: 0~25ms
Resistance :0~1MΩ
Diode :Germanium diode, silicon diode
Relay Test :Regular vehicle 4-pin or 5-pin relays 
Battery Test :100-2000 CCA, 12V vehicle battery
Rating Current :1A~8 A

ANCEL PB600 Packing List：
Super Probe Circuit Tester * 1
Long Probe Tip *1
Short Probe Tip*1
Puncture Needle *1
Puncture Needle Extension Cable *1
Battery Clip Cable *1
Tester Extension Cable *1
Relay Test Cable *1
User’s Manual *1
Tool Box *1

 

 

 
 
 
 
 
 
 

• We accept all common forms of payment such as Credit Cards,Debit Card,Google Pay ect. 

• Payment should be made within 4 days after bidding ends.Otherwise a Unpaid Item case will be opened to you.

• Please contact us if you need to use another method to pay.We are not responsible for buyers’ local taxes.

• Please include your special requests in eBay note if there is any,or you can send ebay message to us.

• Shipping Methods: USPS First Class Mail Service /USPS Priority Mail Service/UPS Surepost Service/ UPS Ground Service.

• Processing Time:We will process your order within 1 business day (excluding holiday and weekend)

• Shipping Time:Order will be shipped within 1 business day after payment confirmed(excluding holiday and weekend)

• Delivery Shipping: If you have any problems, you can contact us first or contact local USPS, UPS.

• Notice:For USA Buyer, We have warehouse in different places, parcel will be shipped from the nearest warehouse

• Buyer Guarantee
We assure you that we are a honest and super reliable seller on ebay, any problems can be solved in a satisfing way for you and any loss will not be brought to you as long as you will kindly contact us via ebay message or your private email. 

• Return Policy
In case an item arrives faulty or not happy with your purchasing, please contact us in 30 days and keep it unused.We will instruct you on how to return and get refund or replacement,please email us first for return address and instructions.

• Kind Tips
Please do not hesitate to leave us your Positive Feedbackand good review,If you are satisfied with our products.
we work hard to make sure every customer 100% satisfied and resolve any problem for you. Thank you for your kindness. 

• ANCEL TECHNOLOGY CO., LTD specializes in automotive intelligent diagnostics, detection and analysis systems, and automotive-related products for mechanics, repair shops, and DIYers.

• Ancel persists on technological innovation and has independent intellectual property rights, factory, and technical team. With the mission of providing customers with high-quality products, technologies and services in the automotive field. 

• This year, our product line has made new breakthroughs, and successively released ANCEL AR500,DM500,DS300,DS600,DS700,HD8000,DP500,V6 HD,V5 HD,DP500. Next, we will continue to innovate and provide more quality products

• We support remote assistance by TeamViewer if you have any difficulty in software installation.

• Our customer-oriented service strives for buyers' 100% satisfaction.

• Please feel free to contact us via eBay message once you have any question before leaving neutral / negative feedback or open case. We will reply in 24 business hours.

• Business time: GMT8(9:00-18:30) from Monday to Friday.

• Please leave us Positive Feedback and 5-stars★★★★★ selling ratings if you receive the product and are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.

 

 

 

Datacaciques