Specifications:
● Model: 50KTYZ
● Size: φ51 X 38mm
● Eccentric shaft diameter 7mm
● Power supply: AC220V
● Input power: 6W
● Power supply mode: AC
● Running speed: Low speed motor
● Application: Universal
● Number of phases: Single-phase motor
● Installation structure type: Vertical
● Function Type: Drive Motor
● Protection type: Open
● Insulation class: E class
● Type of power supply: AC motor
● How it works: Synchronous motor
● Structure and working principle: Permanent magnet synchronous gear motor
● Input power: 6W
● Power supply mode: AC
● Running speed: Low speed motor
● Application: Universal
● Number of phases: Single-phase motor
● Installation structure type: Vertical
● Function Type: Drive Motor
● Protection type: Open
● Insulation class: E class
● Type of power supply: AC motor
● How it works: Synchronous motor
● Structure and working principle: Permanent magnet synchronous gear motor
AC 220V Rated speed 1 rpm Rated torque 28kg.cm
AC 220V Rated speed 2.5 rpm Rated torque 23kg.cm
AC 220V Rated speed 5 rpm Rated torque 15kg.cm
AC 220V Rated speed 10 rpm Rated torque 8kg.cm
AC 220V Rated speed 15 rpm Rated torque 5kg.cm
AC 220V Rated speed 30 rpm Rated torque 2.8kg.cm
AC 220V Rated speed 66 rpm Rated torque 1.5kg.cm
AC 220V Rated speed 90 rpm Rated torque 1.1kg.cm
AC 220V Rated speed 2.5 rpm Rated torque 23kg.cm
AC 220V Rated speed 5 rpm Rated torque 15kg.cm
AC 220V Rated speed 10 rpm Rated torque 8kg.cm
AC 220V Rated speed 15 rpm Rated torque 5kg.cm
AC 220V Rated speed 30 rpm Rated torque 2.8kg.cm
AC 220V Rated speed 66 rpm Rated torque 1.5kg.cm
AC 220V Rated speed 90 rpm Rated torque 1.1kg.cm
Features: Low power consumption, high torque, low noise, small size, light weight, easy to use, controllable forward and reverse directions, etc.
Mainly used in: Monitor pan/tilt, electric equipment, heating and cooling valves, automated instruments, electric models, electric advertisements, mahjong tables, screen machines, plastic machines, money counters, barbecue equipment, electric summons devices and all low power Run the equipment at a low constant speed.
Buyer's Note:
1. Make sure that the motor voltage is correct before use, and if it is a DC motor, also confirm whether the power supply current is sufficient.
2. It can not be overloaded. The reasons for overloading are mainly divided into two parts, torque and shaft force. The load torque should not exceed the rated torque of the motor, and the shaft force should not exceed the axial and radial allowable force of the shaft. After the load is applied, the measured current of the motor cannot exceed the rated current. Generally, the motor must be equipped with a fuse to avoid overloading the motor.
3. Do not store or operate in a high temperature or humid environment, and do not place it in corrosive gas, which will reduce the performance of the motor.
4. When assembling transmission parts such as gears and pulleys on the motor shaft, do not knock abnormally when pressing in.
Mainly used in: Monitor pan/tilt, electric equipment, heating and cooling valves, automated instruments, electric models, electric advertisements, mahjong tables, screen machines, plastic machines, money counters, barbecue equipment, electric summons devices and all low power Run the equipment at a low constant speed.
Buyer's Note:
1. Make sure that the motor voltage is correct before use, and if it is a DC motor, also confirm whether the power supply current is sufficient.
2. It can not be overloaded. The reasons for overloading are mainly divided into two parts, torque and shaft force. The load torque should not exceed the rated torque of the motor, and the shaft force should not exceed the axial and radial allowable force of the shaft. After the load is applied, the measured current of the motor cannot exceed the rated current. Generally, the motor must be equipped with a fuse to avoid overloading the motor.
3. Do not store or operate in a high temperature or humid environment, and do not place it in corrosive gas, which will reduce the performance of the motor.
4. When assembling transmission parts such as gears and pulleys on the motor shaft, do not knock abnormally when pressing in.
5. When soldering is required on the motor terminals of the positive and negative poles of the power supply, the temperature of the soldering iron is 340°C±40°C, and the heating time is within 3 seconds, and the plastic cannot be deformed. During work, let the solder point flow into the motor or break the end of the wire. Deterioration of motor function.
6. When installing the motor, pay attention to whether the screws are too long, and prevent the long screws from pressing the parts inside the motor.
7. Torque concept: For example, when driving the pulley, the torque of 10KG.CM, the pulley radius is 1CM, the belt has 10KG pulling force, and if the pulley radius is 5CM, the belt has only 2KG pulling force.
8. Common units: 1N.M=10KG.CM==0.1KG.M, 1HP=750W, 1W=1V.A
6. When installing the motor, pay attention to whether the screws are too long, and prevent the long screws from pressing the parts inside the motor.
7. Torque concept: For example, when driving the pulley, the torque of 10KG.CM, the pulley radius is 1CM, the belt has 10KG pulling force, and if the pulley radius is 5CM, the belt has only 2KG pulling force.
8. Common units: 1N.M=10KG.CM==0.1KG.M, 1HP=750W, 1W=1V.A
Note:
Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
All dimensions are measured by hand, there may be small deviations. Thanks!
Package Including: According to your choose. Choose your need from above drop down menu.
Payment:
We accept Paypal only, It is fast, Easy and Safe.
Payment must be completed within 7 days.
PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
Please list your special requests (color, packages, etc.) in the PAYPAL NOTES SECTION when you make payment.
Shipping:
We Ship to Worldwide.
Orders processed within 24-48 hours of payment verification. it will take 15-25 days for delivery. but Customs will random inspection some parcel, so that's why some parcel need more than four weeks to arrive. Shipping time is only estimated and not guaranteed.
We only ship to confirmed PAYPAL addresses. Your PAYPAL address MUST MATCH your Shipping address.
Package to USA will Shipping by E-Package with Tracking Number(7-15 Days to Delivered). To other Countries will shipping by Post Air Mail without tracking number(ONLY when the order is over 20USD will supply Tracking Number Shipping Way!)(15-35 Days to Delivered)
Items are shipped via China Post Air Mail.
Guarantee:
Good Good quality. Buy with confidence!
If you are not satisfied when you receive your item, please return it within 7 days for a replacement or money back. Please contact me before you return it.
Not accept returning of electronic components.
Full refund after we receive our original item, Note: Return shipping is to be paid by the Buyer.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
