Note1:  

Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.
If you can't confirm 100% fit, Pls Send us your VIN or part number(s).
Note2:
【No sensor programming Required】 : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle, need activate them by Right scan tool or "re-learning"   Right Activation tool is important, if you wanna Your  vehicel Relearn Procedure Description, Pls email us ...
1.Stationary Relearn: Requires the vehicle be placed in the “Learn Mode”.
2.Automatic Relearn: For some vehicles, can be completed by driving.
3.OBD Relearn: Directly writes TPMS sensor IDs to the TPMS module via the OBD connector.
Installation of TPMS is recommended to be performed only by trained professionals.

Part Number: PR3T-1A180-CB

Replacement Part Number: PR3T-1A180-CA; PR3T-1A180-CC; PR3T-1A180-CD; PR3T-1A180-DA; PR3T-1A180-KB; PR3T-1A180-KC; PR3T-1A180-KD; PR3T-1A180-LA; PR3T-1A180-MA; PR3T-1A180-NA


Package included:
4Pcs Tire Pressure Sensor


Operating Frequency:
433MHz



Fits the following vehicles:

For Ford / For Lincoln / For Volkswagen

For Ford
For (US)Ford Bronco (from 2024-10 to 2032-03)
For (US)Ford Bronco Sport (from 2024-11 to 2029-10)
For (US)Ford Ranger (from 2024-10 to 2032-03)
For (US)Ford E-Series (from 2024-10 to 2034-12)
For (US)Ford Expedition (from 2024-11 to 2031-12)
For (US)Ford Expedition Max (from 2024-04 to 2025-01)
For (US)Ford Explorer (from 2024-06 to 2031-03)
For (US)Ford F-150 Lightning (from 2024-09 to 2026-04)
For (US)Ford F-150 Reg/Ext (from 2025-09 to 2027-01)
For (US)Ford F-150 Supercrew (from 2025-09 to 2027-01)
For (US)Ford F-250/350 Super Duty (from 2024-06 to 2028-03)
For (US)Ford Maverick (from 2024-11 to 2029-10)
For (US)Ford Mach-E (from 2024-07 to 2028-12)
For (US)Ford Mustang (from 2023-06 to 2034-07)
For (US)Ford Transit (from 2024-08 to 2039-02)
For (EU)Ford Kuga III (from 2024-07 to 2026-12)
For (EU)Ford Mustang (from 2023-08 to 2033-11)
For (EU)Ford Puma (from 2024-03 to 2027-06)
For (EU)Ford Tourneo Courier (from 2024-03 to 2032-04)
For (EU)Ford Tourneo Custom (from 2023-10 to 2029-06)
For (EU)Ford Transit (from 2024-03 to 2025-03)
For (EU)Ford Transit Courier (from 2024-03 to 2032-04)
For (EU)Ford Transit Custom (from 2023-10 to 2033-06)
For Lincoln
For (US)Lincoln Aviator (from 2024-06 to 2026-06)
For (US)Lincoln Navigator (from 2024-11 to 2031-12)
For Volkswagen
For (EU)Volkswagen Transporter (from 2025-10 to 2034-06)
For (EU)Volkswagen Transporter Shuttle (from 2025-01 to 2035-01)

Product Features:
★Safe and Reliable --- It is suitable for monitoring the internal pressure, temperature and other information of the tire, avoiding traffic accidents caused by tire failure, provide you with a better safety in the driving process.
★No programming required --- The tire pressure monitor system (TPMS) come pre-programmed specifically for your make/model/year of vehicle.

Order Notes:
★Before placing the order, please check your car VIN code, model, year. Please view product description including the notes, or contact us.
★Your vehicle will require programming after installation of new sensors (in most circumstances).
★Consult your owner's manual to see what procedure is required for your particular vehicle when installing new TPMS.
★If you would like some specific information on the programming procedure for your vehicle or have any other TPMS related questions we are happy to offer our expert advice!

Please make sure your existing part number matches one of the numbers listed above.If the number(s) do not match,then the part will not work with your vehicle.

■ Installation Process for reference only:
1. Loose the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.