Why purchase a recycled keyless entry remote transmitter?

The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today!

Installed RKE System Type: Please be sure you have an AFTERMARKET (RKE) remote keyless entry system. If your current remote looks the same then this will work. Other options include: Dealer Installed or Factory. The system installed in your vehicle will CHANGE the required remote. If you are unsure send us a message with your current remotes FCC ID and Part # and LED Light color. If you no longer have your remote then send us a message with your system brand, and system id #.

What are you purchasing ? This is ONE (1) replacement keyless entry remote control that will work with your AFTERMARKET installed RKE system.

Compatibility: Works with vehicles that use a compatible aftermarket RKE (remote keyless entry) system installed. See our compatible system list below or match your current remote FCC ID and / or part # or circuit board # and LED Light color (if applicable)to the numbers listed below.

This item is pre-owned – it will work like new once programmed to your vehicle

One (1)

Aftermarket OEM car remote keyless entry fob alarm

Transmitter control keyfab fab phob keyphob 

beeper vehicle engine car starter clicker keyfob controller replacement key fob

Functions at 100% Tested with battery installed & Guaranteed

CODE ALARM CODEALARM SYSTEMS

 FCC ID: GOH-FRDPC2002

 (INTERCHANGEABLE) FCC ID’s FCCID:

GOH-TSM23 GOH-FRDPC200 GOH-PC200 ELVATPA GoH-FRDPC2002

GOHFRDPC2002 GOHFRDPC2000 GOHTSM-23

GOH-FRDPC2002 GOH-FRDPC2000 GOH-TSM-23

GOH-TSM-23

GOH-FRDPC2002

PART #: PT-5/ P/N# 101112

2W7Z15K601BA

 1L3Z-19G365-AB

2W7J-19A206-AA

2W7J-19G367-AA

 1L3Z19G365AB

2W7J19A206AA

2W7J19G367AA

 

Interchangeable Circuit Board #'s: PCB0182L PCB0182M PCB0182NMNL

 GREEN CIRCUIT BOARD INSIDE REMOTE SAYS :

PCB0182L MNL 6/99 D1 94V-0 0711

 

(INTERCHANGEABLE) PART #s:

1010686

1013465

1013473

1013507

1013515

1013523

CATX130

CATX630

PT-5




  FREQUENCY: 433MHz

 2 BUTTONS: Lock Unlock Car Starter Panic Alarm Horn 

 

COMPATIBLE WITH THE FOLLOWING SYSTEMS:

 CODE ALARM

CA130

(130)

CA530

(530)

ELITE

4100

4200

 4300

4400

 4800

 6100

 6800

7300

 7500

7600

PRO

 F12

 F17

 F60

 F65

3800

 

WORKS ON FORD SYSTEMS 
2W7Z15K601BA

 1L3Z-19G365-AB

2W7J-19A206-AA

2W7J-19G367-AA

 

PROGRAMMING THE REMOTE(S)

Programming METHOD #1

 

To program new or additional transmitters, the alarm must be disarmed and out of valet mode:

1.    Open the driver’s door (verify that the vehicle’s interior light turns on.)

2.    Turn the ignition key to the on or run position.

3.    Press and hold the emergency override button.

a.     After 10 seconds the horn will honk 3 times. This indicates that the system has entered transmitter programming mode.

4.    Release the emergency override button.

5.    Press the lock icon button on the remote transmitter to be programmed.

a.     The horn/siren will sound 1 time indicating that the system has learned that remote transmitter.

6.    Repeat step 5 for any additional remote transmitters.

Programming METHOD #2

1) Enter the vehicle, and turn the ignition switch to the ON position.

2) Press and release the Programming button switch 3 times.

3) Press and hold the LOCK button of the transmitter you wish to program.

4) The lights will flash 1 time, indicating that the system is accepting the programming of channel #1 which is lock.

"Repeat step 3 for each transmitter you wish to program"

5) Press and release the valet push button switch 1 time to advance to channel 2.

6) Press and hold the UNLOCK button of the transmitter you wish to program.

7) The lights will flash 1 time, indicating that the system is accepting the programming of channel #2 which is unlock.

"Repeat step 6 for each transmitter you wish to program"

8) Press and release the valet push button switch 1 time to advance to channel 3.

9) Press and hold the TRUNK button of the transmitter you wish to program.

10) The lights will flash 1 time, indicating that the system is accepting the programming of channel #3 which is trunk.

"Repeat step 9 for each transmitter you wish to program"

11) Press and release the valet push button switch 1 time to advance to channel 4.

12) Press and hold the STAR button of the transmitter you wish to program.

13) The lights will flash 1 time, indicating that the system is accepting the programming of channel #4 which is remote start.

"Repeat step 12 for each transmitter you wish to program"

Payment:  We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments.  Payment is expected within 5 days. 

PA SALES TAX:  As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).

100% Guarantee Remote Shipping / Return Policy

Warranty/Returns:  

1.     We have a 30 day return policy. 

2.     All returns for replacements and refund need an RMA #.

3.     Please contact us before returning items so we can give you the RMA # and the proper return address.

4.     No refunds / replacements will be granted without an RMA#

 

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

 

Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.

 


 




Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system
.