Solar Outdoor Lamps with Motion Detector

Light up where you walked

With the 56 LED Solar Lamp, your way home will be illuminated!

 LED Solar Lamp

Duration of each lighting

30 seconds (If a moving object is detected nearby, the LED light will stay on.)

Protection level: IP65

With the professional IP65 protection level, even if exposed to the outdoors for a long time, the interior of the solar lamp can be waterproof and dustproof, while maintaining a very bright brightness.

Light-emitting size: 15cm * 11cm * 2.3cm

Solar panel: 13 cm * 11.5 cm * 1.5 cm

Product parameter

  • Brightness: 300LM
  • Color temperature: 7000K
  • Solar panel: 5.5V / 180mA
  • Battery: 3.7V / 1200mAh
  • Cable length: 5M
  • Number of LEDs: 56
  • Irradiation area: 12 * 8cm

  • Please install the solar panel in direct sunlight.
  • Do not install solar panels in the shade of trees or buildings.
  • The duration of the lighting depends on the duration of exposure to the sun.
  • In cloudy, rainy, or snowy weather, the sun's rays are not good, the battery power may be insufficient, and the brightness may decrease, which is normal.
  • As long as the weather is clear, the battery level and the brightness of the lights will return to normal.

LED Solar light

Use lights to deter strangers

Whether it is installed indoors or outdoors, the lights can be turned on automatically. Combining the light sensor and the motion sensor, your house will be protected from being disturbed by strangers.

LED Solar light

User friendly design

We separate the solar panel and lighting, and the solar absorption panel can store more electricity in more sunlight and provide longer and brighter light at night.

So you can install the lamp body under the eaves or under the fence.

LED Solar light

5m / 16.5ft cable

The solar wall light equipped with a 5 meter long cable, the charging plate can be easily attached with sufficient daylight, such as roof, improve the charging efficiency.

LED Solar light

Sensor mode

When movement is detected at night, the light body automatically activates the light source and emits light for 30 seconds each time

Installation diagram


Usage Notice

Usage Notice

  • This solar light has no switch. As long as you connect the cable, you can use it normally, when connected correctly, the light will flash once.
  • If there is light around the solar panel, it will automatically switch to charging status.
  • When there is no light around the solar panel, it will automatically switch to motion detection mode, when the detection system detects the movement of nearby objects in working state, it will automatically turn the light bulb on for about 30 seconds and then turn off.
  • This light is not always on. When you move away from the light, the light will turn off automatically
  • The light cannot be switched on during the day, the light can only be switched on at night.
  • You can also block the solar panel to simulate the night and test if it works normally.