Stock Photo

See pictures for an example of what you will receive.

 One (1)

Aftermarket Security Installed System

 remote keyless entry fob alarm controller

Transmitter control clicker keyfob controller replacement

Bulldog

             FCC ID#: J3S0045CH00

Alternate Spelling: J3S0045CHoo J3Soo45CH00 J3Soo45CHoo or TX4BD

Part#: C705

LED LIGHT: Red

Buttons: 4; Lock, Unlock, Panic, “*” Car Starter

Frequency: 303 – 305 MHz

Battery: 1; GP27A

See Item Specifications for more details

 

Compatible With the following Aftermarket installed security systems:

KE1702

 

 

 

Programming Instructions:

Press and hold the brake. Next, press and hold button #1 (KEY) on the working remote until the parking lights flash once, then release. Press and release button #4 (STOP) on the new remote. The parking lights will flash three times confirming that the new remote was learned.

OR

  1. Turn the ignition switch off/on 3 times and keep it in the on position.
  2. Push the valet switch 2 times and hold it in on the 2nd push until a long chirp is heard then release the valet switch. You are now in the transmitter programming mode.
  3. Press and hold any button on the transmitter until the siren responds with a confirming chirp, indicating the signal has been stored into memory.
  4. If you have additional transmitters (up to 4) that need to be programmed, repeat step 3 for each transmitter.

To exit programming mode: Turn the ignition to the off position or leave it alone for 15 seconds. 3 long chirps and 3 parking light flashes will confirm exit.

 

 

How to find out if this remote is compatible with your Vehicles’ installed RKE System

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

1.   Check the back of your current or old keyless remote to match FCC ID /Part #’s.

2.   Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.

 

Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.

 

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.