AT-VM95E/H

The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell.

     

    • VM dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
    • Aluminum cantilever
    • Specially wound coils increase output voltage
    • Durable low-resonance polymer housing
    • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required
    • Compatible with any AT-VMN95 replacement stylus
    • Universal ½"-mount headshell for 4-pin turntable cartridges

     

     

    Cartridge & Stylus
    Frequency Response20-22,000 Hz
    Channel Separation20 (dB at 1 kHz)
    Vertical Tracking Angle23°
    Vertical Tracking Force1.8-2.2 g (2.0 g standard)
    Stylus ConstructionBonded round shank
    Recommended Load Impedance47,000 ohms
    Coil Impedance3.3 k ohms (1 kHz)
    DC Resistance485 ohms
    Coil Inductance550 mH (1 kHz)
    Output Voltage4.0 mV (1 kHz, 5 cm/sec.)
    Output Channel Balance2.0 dB (1 kHz)
    Stylus Shape0.3 x 0.7 mil elliptical
    CantileverAluminum pipe
    Static Compliance17 x 10 – 6 cm / dyne
    Dynamic Compliance7 x 10 – 6 cm / dyne (100 Hz)
    MountingHalf-inch
    DimensionsCartridge 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D; Cartridge & Headshell 21.2 mm (0.83") H × 21.4 mm (0.84") W × 62.4 mm (2.46") D
    Accessories IncludedTwo 11 mm installation screws, two 8 mm installation screws, two washers
    ModelAT-VM95E/H
    Mounting FeatureHalf-inch mount
    Recommended Load Capacitance100 to 200 pF
    Replacement StylusAT-VMN95E
    Stylus Size0.3 x 0.7 mil
    TypeVM Stereo Dual Magnet
    WeightCartridge 6.1 g (0.22 oz); Cartridge & Headshell 15.5 g (0.55 oz)
    Wire Used for CoilT.P. Copper