TEST MODE
Set-up:
Put the "Time" switch at TEST position.
Function:
- When people or any other living objects pass through the induction zone, the light turns on for 5 seconds automatically. Test Mode helps you to check whether the motion sensor can work properly.
- Test Mode can work at daytime and night.
|
MOTION SENSOR (AUTO) MODE
Set-up:
Put the "Time" switch at 1, 5, or 10 minutes position.
Function:
- When people or any other living objects pass through the induction zone, the light will be on automatically for 1, 5, 10 minutes chosen.
- Motion Sensor Auto Mode only works at night.
|
MANUAL MODE
Set-up:
Put the "Time" switch at 1, 5, or 10 minutes position. Flip the light switch off for one second then back on to toggle between Auto and Manual mode.
Function:
- Under Manual Mode, the light will work at night for 4-6 hours.
- Manual Mode only works at night, because daylight will return the sensor to Auto Mode.
|
ATTENTEION
- Make sure that there are no infrared or ambient lights pointing towards the motion sensor.
- Make sure that there are no other influence factors affect the performance of light.
- Be sure to disconnect the power before you install the light.
- Be sure to mount it in dry location, humid environment is not good for light's lifespan.
|