BALANSET-1A
Portable Dual-Channel Rotor Balancer & Vibration Analyzer
Balance your rotors without disassembly — right in your workshop or on-site
Built for maintenance teams, workshops and field service
Complete Standard Kit
- 2-Channel Interface Unit
- 2x Vibration Sensors
- Laser Tachometer
- Balancing Software
- Magnetic Stand & Scale
- Professional Carrying Case
Why Balanset-1A — The Choice of Professionals
Service Savings
Do the balancing yourself, without calling third-party specialists. The device pays for itself in 2–3 uses.
Versatility
One device for forestry and drum mulchers, crushers, fans, augers of combine harvesters and any other rotors. Dedicated balancing machines for mulchers cost around $5,000.
Easy to Use
Intuitive software. Learn in 1 day. No special operator training required.
Speed
On-site diagnosis and imbalance correction immediately upon detection. Full cycle in under 1 hour.
Reliability
2-year warranty with engineer support.
Tech Support
Engineer consultations by message.
WATCH BALANSET-1A IN ACTION
See actual balancing results achieved with Balanset-1A - Before and After demonstrations
PRODUCT OVERVIEW
The Balanset-1A is a cutting-edge portable balancing and vibration analysis system designed for maintenance professionals and service technicians. Unlike complex analyzers that require extensive training, the Balanset-1A focuses on practical, user-friendly operation while delivering laboratory-grade precision.
✅ Why Choose Balanset-1A?
- Save Time & Money: Eliminate expensive service calls and equipment downtime with on-site balancing capabilities. ROI typically achieved within 2-3 balancing jobs!
- Professional-grade accuracy at an affordable price point
- User-friendly interface - minimal training required
- Dual-channel system for comprehensive analysis
- Portable design for field service work
- ISO 1940 compliant balancing standards
- Compatible with wide range of rotors: fans, pumps, turbines, crushers, and more
The High Cost of Vibration — And How to Prevent It
Reducing vibration by 50% can extend bearing life by up to 800%. This is physics — bearing wear depends on vibration cubed.
Proper balancing reduces energy consumption and fuel costs by 5-15%. Less vibration = less wasted energy.
At 900 rpm, just 28 grams of imbalance becomes a 6-kilogram hammer hitting your bearings 14 times per second.
Stop the damage: Balanset-1A
Eliminate imbalance yourself in an hour — without calling service and costly downtime. The device pays for itself after the first prevented accident.
HOW IT WORKS
The Influence Coefficient Method:
The Balanset-1A uses the scientifically proven "influence coefficient method" to automatically calculate the exact mass and position of correction weights needed to eliminate vibration.
- Initial Measurement: The system measures the original vibration amplitude and phase
- Trial Weight Installation: A known test weight is temporarily installed
- Response Analysis: The system measures how the rotor responds to the test weight
- Automatic Calculation: Advanced algorithms calculate the exact correction needed
- Final Balancing: Permanent correction weights are installed based on calculations
- Verification: Final measurement confirms successful balancing to ISO standards
TECHNICAL SPECIFICATIONS
📊 Measurement Parameters
| Measurement Channels: | 2 channels |
| Vibration Range (Overall): | from 0.2 mm/s RMS, sensor limit ±3 g (about 66 mm/s at 3,000 RPM) |
| Vibration Range (1×, balancing): | from 0.05 mm/s RMS |
| Calibrated Frequency Range: | up to 550 Hz (33,000 RPM) |
| Rotation Speed: | 100 – 100,000 RPM |
| Vibration Repeatability: | ±0.05 mm/s |
| Phase Repeatability: | ±0.5° |
🔧 System Specifications
| Vibration Sensor Cable: | 5m |
| Sensor Dimensions: | 25 × 25 × 20 mm |
| Laser Sensor Distance: | 50 – 500 mm (typical) |
| Case Dimensions: | 39 × 33 × 13 cm |
| Weight (Complete Kit): | approx. 4 kg |
| Interface: | USB |
| Balancing Standard: | ISO 21940-11 (ISO 1940), grades G0.4 – G4000 |
📈 Measured Parameters
RMS
Amplitude
Angle
Speed
FFT
OPERATING MODES
Vibrometer
Overall vibration monitoring and analysis
Single-Plane
Static balancing for disk-like rotors
Two-Plane
Dynamic balancing for long rotors
FFT Spectrum
Frequency analysis and diagnostics
🔧 Vibrometer Features:
- Tachometer for accurate RPM measurement
- Phase angle determination
- FFT spectrum analysis
- Overall vibration monitoring
- Measurement logging capabilities
⚖️ Balancing Features:
- Automatic correction mass calculation
- Polar graph visualization
- Storage of influence coefficients
- Re-balancing using archived data
- ISO 1940 tolerance calculator
COMPLETE PACKAGE CONTENTS
Full Kit Includes:
- ●Electronic Measuring Unit
- ●Vibration Sensors (2×) - Accelerometers
- ●Laser Tachometer - Phase reference sensor
- ●Sensor Cables - 5m standard length
- ●USB Connection Cable
- ●USB Flash Drive - Software included
- ●Magnetic Stand - Tachometer mounting
- ●Electronic Scale - For weight measurement
- ●Transport Case - 39×33×13 cm
- ●Operating Documentation - On USB flash drive
💻 System Requirements:
- Windows laptop/PC (not included)
- USB-A port
- 4 GB RAM (8 GB recommended)
- Screen resolution 1366x768 or higher (1920x1080 recommended)
- If Windows display scaling is 125% or more, set the program's interface scale to 100%
📏 Sensor Specifications:
| Dimensions: | 25 × 25 × 20 mm |
| Weight: | 25 g |
| Cable: | 5m |
| Mount: | Magnetic (removable) |
| Thread: | M4 optional |
Colors, packaging design, and minor cosmetic details of components shown in photos may slightly vary from the actual product you receive. Included accessories (such as electronic scale, magnetic stand, carrying case) may be of equivalent models with the same functionality and specifications. Software version and interface appearance may also differ from screenshots shown in this listing due to ongoing updates and improvements. These variations do not affect the performance of the equipment — all technical characteristics and complete functionality remain exactly as described.
Where Balanset-1A is Used
Universal solution for balancing rotating equipment across all industries
Manufacturing
- Fans & blowers
- Crushers & grinders
- Pumps & motors
- Machine spindles
Agriculture
- Harvester rotors
- Mulchers & shredders
- Augers & conveyors
- Mounted equipment
Energy
- Boiler fans
- Gas blowers
- Pump drives
- Generators
Oil & Gas
- Pumps
- Turbocompressors
- Mixers
- Drive shafts
Machine Tools
- Spindles
- Grinding wheels
- High-speed drives
- Turbine rotors
Transport
- Cardan shafts
- Drive shafts
- Cooling fans
- Rotary pumps
Aviation
- Propellers
- UAV / Drone rotors
- Cooling fans
- Small turbines
Marine
- Propeller shafts
- Ship pumps
- Blowers
- Diesel generators
One device for ANY rotating machinery — from tiny UAV rotors to massive industrial turbines
100-100,000 RPM • All rotor types • Field or workshop use
REAL-WORLD SUCCESS EXAMPLES
🚜 Combine Harvester Shredder
Before: At working speed, vibration reached 28 mm/s
Solution: Calculated and installed 70g correction weight
After: Vibration decreased to 1.0 mm/s - continued operation without repairs
🌀 Industrial Fan Balancing
Before: Vibration reached 15 mm/s (norm: up to 2.8 mm/s)
Solution: Installed correction weights of 40g and 35g
After: Vibration reduced to 1.1 mm/s - fan runs smoothly without noise
🌾 Agricultural Mower
Before: After season use, blade rotor vibration reached 18 mm/s
Solution: Calculated and installed 16g correction weight
After: Vibration reduced to 1.2 mm/s - smooth cutting operation
🏭 Feed Mill Crusher
Before: Rotor vibration was 22 mm/s - bearings overheating, excessive noise
Solution: Added 110g correction weight on rotor rim
After: Vibration dropped to 0.8 mm/s - eliminated bearing issues
💨 HVAC System Fan
Before: Fan vibration of 12 mm/s created noise and building shake
Solution: Professional balancing with calculated correction weights
After: Vibration reduced to 0.9 mm/s - silent operation achieved
💻 Professional Software
Advanced Features: Real-time spectrum analysis, polar graphs, automatic calculations
User-Friendly: Step-by-step guidance through entire balancing process
Professional Reports: Complete documentation for quality assurance
RETURN ON INVESTMENT
💵 Cost Savings Breakdown:
| Service Call Elimination | $500-2000 per call |
| Reduced Downtime | $1000-5000 per hour |
| No Disassembly Needed | Save 2-8 hours labor |
| Extended Bearing Life | Up to 8× longer |
| Energy Savings | 5-15% reduction |
📊 Typical ROI Timeline:
- First job: 20-40% investment recovery
- Second job: 60-80% investment recovery
- Third job: Full ROI achieved + profit
- Ongoing: Pure profit + improved reliability
ANALYSIS & REPORTING FEATURES
📈 Advanced Analysis
- Overall vibration charts - Monitor equipment health
- 1x vibration analysis - Isolate imbalance-related vibration
- Harmonic analysis - Detect mechanical faults
- FFT spectrum charts - Frequency domain analysis
- Polar graphs - Vector representation of imbalance
- Trending analysis - Track changes over time
📋 Professional Reporting
- Automatic report generation - Professional documentation
- Before/after comparisons - Demonstrate improvement
- ISO 1940 compliance verification - Meet industry standards
- Archive storage - Unlimited data retention
- Serial production support - Batch processing
- Report export - PDF, HTML, RTF
SUPPORT & WARRANTY
🎯 PEACE OF MIND GUARANTEE
Every Balanset-1A comes with comprehensive support and warranty coverage
✅ What's Included:
- 2-year parts and labor warranty
- Direct technical support (contact info included)
- Software package with user manual
- Hardware documentation
- 14-day returns accepted, see the return policy
🔧 Spare Parts Available:
Replacement sensors, cables, and other spare parts are available upon request.
📞 How to Get Support:
You will receive detailed support contact information with your order. Direct support channels are provided to all customers for fast and efficient assistance.
Business Hours: Monday-Friday, 9 AM - 6 PM (Lisbon time)
Device includes comprehensive user manual and documentation. Support contact details included in package for direct manufacturer assistance.
FREQUENTLY ASKED QUESTIONS
Q: Do I need special training to use the Balanset-1A?
A: No, the system is designed for ease of use. Basic training materials are included, and most users can perform balancing operations after just a few hours of practice.
Q: Can this device balance rotors in place?
A: Yes! The Balanset-1A is specifically designed for field balancing without removing rotors from their housings.
Q: What's the difference between single-plane and two-plane balancing?
A: Single-plane (static) balancing is used for narrow, disk-like rotors. Two-plane (dynamic) balancing is used for longer rotors and eliminates both static and couple imbalances.
Q: How accurate is the measurement system?
A: Measured repeatability is ±0.05 mm/s for vibration velocity and ±0.5° for phase. Balance quality grades follow ISO 21940-11 (ISO 1940).
Q: What language is the software interface?
A: The software interface is available in 26 languages, including English, German, French, Spanish, Italian and Portuguese. The user manual is in English.
Q: Does the device require calibration?
A: The device comes factory-calibrated and ready to use. Calibration coefficients are stored in the software and applied automatically during measurements.
Q: Are software updates available?
A: Yes. The program has an update option in the About section.
Q: Is technical support available?
A: Yes, direct support contact information is provided with every purchase. You'll have access to manufacturer support, online resources, and video tutorials.
Q: What industries commonly use this equipment?
A: Manufacturing, power generation, HVAC, agriculture, paper mills, food processing, mining, and any industry with rotating machinery.
Balanset-1A vs. Alternatives
| Criteria | Balanset-1A | Outsourced Service | Premium Brands |
|---|---|---|---|
| Cost per balancing job | $0* *after device purchase |
$500-2,000 | $0* *3-5× higher device cost |
| Response time | Immediate | Days to weeks | Immediate |
| Learning curve | 1 day | N/A | 1-2 weeks training |
| Field balancing | ✓ Yes | ✓ Yes | ✓ Yes |
| ISO 1940 compliance | ✓ Yes | ✓ Yes | ✓ Yes |
| Total ownership (3 years) | Lowest | Very High | High |
ABOUT VIBROMERA
Vibromera is a leading manufacturer of precision balancing equipment with over 10 years of experience in vibration analysis and rotor dynamics. Our products are trusted by maintenance professionals in over 50 countries worldwide.
🌍 Global Presence:
- Headquarters in Portugal with worldwide distribution
- Products used in 50+ countries
- Continuous R&D investment in new technologies
📜 Certifications & Standards:
- ISO 21940-11 (ISO 1940) balance quality grades
PT 320487539
Tracked Delivery from Portugal
We ship from Portugal with full tracking. eBay shows the handling time and the estimated delivery date for your address in the Delivery section of this listing.
Handling time
Shown by eBay in the Delivery section of this listing. It starts after payment is confirmed.
Where we ship
eBay lists the countries we ship to in the Delivery section of this listing.
Express, fully trackedPackage size
Standard shipment box size:
45 × 35 × 15 cm (approx.)
~4 kg
📅 Delivery estimate
The estimated delivery date shown by eBay already includes handling and transit time.
📋 What affects delivery timing:
- Destination country & customs clearance
- Local holidays and peak seasons
- Remote areas may require additional time
✅ Included with every shipment:
- Full tracking number — monitor your package 24/7
- Insurance coverage — your purchase is protected
- Customs documentation — hassle-free import
International Buyers: Quick Customs Tip
Delivery is fast! For destinations outside the EU, import duties or customs fees may apply according to your country's regulations. This is standard for international shipments and varies by country.
Questions or Concerns? We're Here to Help!
If you have any questions about your order, shipping, or the product — please message us directly through eBay. We typically respond within 1 business day.
We are committed to your complete satisfaction and will work quickly to resolve any issue. In our experience, most concerns can be solved with a simple conversation — often faster than you'd expect!
Quick Reference
📦 Tracked Delivery from Portugal
- Ships from: Portugal
- Handling and delivery estimate: see the Delivery section of this listing
- Full tracking number
- Insurance coverage
- Customs documentation
↩️ Returns & Warranty
Returns accepted within 14 days. Buyer pays return shipping. Item must be in original condition with all accessories.
Full warranty coverage on all components. We'll repair or replace any defective parts free of charge.
💳 Payment Methods
We accept all standard eBay payment methods:
Visa, Mastercard, Amex
Secure checkout
Managed payments
📞 Contact Us
Have questions? We're here to help!
- Response time: Within 24 hours (usually faster)
- Pre-sale questions: Always welcome!
- Technical support: Included with purchase
- Language: English
Click "Contact seller" on this listing
ORDER YOUR BALANSET-1A TODAY!
Ships from Portugal with full tracking
Balance your rotors without disassembly • Learn in 1 day • Full cycle under 1 hour
Professional-Grade Equipment
Complete kit with 2-year warranty