Ford / Lincoln Applications — Verify Generation Before Purchase
OEM Part
Inspected & Tested
Lifetime Warranty
Fast Shipping
Free VIN Verification
Expert Tech Support
Gen 2 — 2013-Up
6F35 Transmission
Ford / Lincoln
Not Compatible With Gen 1
Verify Generation Before Purchase
A 6F35 Gen 2 front oil pump for 2013-and-up Ford and Lincoln applications. Features revised internal geometry and mounting characteristics compared to early 2009-2012 Gen 1 units. Gen 1 and Gen 2 are not interchangeable — verify your generation before purchasing.
What's Included
Front Oil Pump
Pump Body Assembly
Internal Components
Ready to Install
Why Buy From ValveBodyWorld
OEM Components
Genuine OEM parts — not cheap aftermarket substitutes with unknown tolerances or materials.
Accurate Listings
We write listings honestly to reduce installation surprises. What you read is exactly what you get.
Professionally Tested
Every unit inspected before shipment. We do not ship parts that fail our quality checks.
Lifetime Warranty
Every part backed by our lifetime replacement warranty against defects. Buy with complete confidence.
Fast Shipping
Quick handling times and secure packaging. Tracked on every order so you always know where your part is.
Expert Tech Support
Questions about fitment or installation? Our team specializes in transmission hydraulics — message us anytime.
Every Unit Goes Through
01
Visual Inspection
Full visual inspection of all surfaces, bores, and passages for cracks, scoring, or wear before proceeding.
02
Professional Cleaning
All passages and components professionally cleaned and cleared of any debris, varnish, or contamination.
03
Component Check
Wear-prone areas measured and inspected. Components outside tolerance are corrected or replaced.
04
Function Verification
Hydraulic function verified prior to reassembly to confirm proper pump operation.
05
Final QC Inspection
Final quality control check completed before the unit is cleared for packaging and shipment.
06
Safe Packaging
Carefully packaged to prevent damage in transit. Every order ships with full tracking.
Generation Warning
Gen 1 and Gen 2 Are NOT Interchangeable
The 6F35 went through a significant design revision between early and late production. Gen 1 (2009-2012) and Gen 2 (2013-up) pumps have different internal geometry, seal configurations, and mounting characteristics. Installing the wrong generation will result in immediate failure. This listing is Gen 2 only.
Wrong — Not This Listing
✘
Gen 1 — 2009-2012
Early 6F35 design. Different bolt pattern, seal style, and internal geometry. Not compatible with Gen 2 valve body or solenoid strategy. This listing does not apply.
Correct — This Listing
✔
Gen 2 — 2013 and Up
Updated 6F35 design with revised internal geometry and mounting. Matches Gen 2 valve body and solenoid strategy. Correct for 2013-up applications. This is what you are purchasing.
OEM Specifications
Transmission
Ford 6F35
Part Type
Front Oil Pump
Generation
Gen 2 — 2013 and Up
OEM Part Numbers
9L8Z-7A103-B / D / G / H / J
Aftermarket Cross Ref
P46500BA | 50-1166
Drive Type
FWD / AWD Ford-Lincoln Applications
Valve Body Design
Gen 2 Compatible
Gen 1 Compatible
No — Not Interchangeable
Condition
OEM — Inspected Before Shipment
Installation
Professional Installation Recommended
Part Numbers / Interchange
Aftermarket Part Numbers
P46500BA
50-1166
OEM Ford Part Number Family
9L8Z-7A103-B / D / G / H / J
Suffix letters B, D, G, H, J indicate OEM revision levels within the same Gen 2 pump family and are all compatible with this application.
Vehicle Compatibility — Gen 2 6F35 (2013-Up)
Ford
Fusion
2013 and up
Escape
2013 and up
Taurus
2013-2018
Transit Connect
2013 and up
C-Max
2014 and up
Focus
2014 and up
EcoSport
2014 and up
Edge
2013 and up
Explorer
2013 and up
Lincoln
MKC
2014 and up
MKZ
2013 and up
MKS
2017 and up
Vehicle models may use different transmissions depending on engine, drivetrain, or hybrid configuration. This pump fits the transmission — not the vehicle alone. Always verify by transmission ID tag or contact us before purchasing.
How to Verify Correct Generation
01
Transmission ID Tag
Check the transmission ID tag for build date and model designation to confirm Gen 2 application.
02
Physical Comparison
Compare bolt count, seal style, and pump dimensions against your existing unit before ordering.
03
Contact Us First
Not sure? Send us your VIN or transmission tag info. We will confirm the correct generation for free.
Always Send Your VIN Before Purchase
We require your VIN prior to shipment to ensure you receive the correct part for your exact vehicle. Send us your VIN via eBay message immediately after purchase.
Send Your VIN Now
Warranty
Lifetime Replacement Warranty
Buy with complete confidence. Every unit inspected and tested before shipment.
Covers part defects and workmanship
Lifetime coverage — not 90 days, not 1 year
Does not cover labor or improper installation
Shipping
Fast Handling
Quick turnaround on all orders
Secure Packaging
Carefully packed to prevent damage
Full Tracking
Tracking provided on every order
About ValveBodyWorld
ValveBodyWorld™
ValveBodyWorld specializes in transmission hydraulic components. Every unit is inspected before shipment and our listings are written accurately to help reduce installation issues and returns. If you have questions or need help confirming compatibility, contact us before purchasing — we are happy to help.