ATTENTION SHIPPER: If the c. board has a silver rectangle that
says 433 on it, it is a 433 MHz remote.
Attention: Ready to Program - Battery Installed TESTED - working 100% -remote will have Galaxy Logo, Astra Logo, No Logo, or Scytek Logo all have the same circuit board and program the same
Customer Please note there are several
compatible remotes that look similar but not exactly
like the photo pictured. We will do our best to ship you the remote
pictured; however,
the remote you receive may look different than the remote pictured. No
worries,
the board will program to your system the same.
This item is pre-owned – it will work like new once programmed to your vehicle
One (1)
Pre-owned remote keyless entry fob alarm
Transmitter control clicker keyfob controller replacement
FUNCTIONS AT 100% TESTED & GUARANTEED
SCYTEK / ASTRA / GALAXY
|
Ready to Program - Battery Installed TESTED - working 100% -remote will have Galaxy Logo, Astra Logo, No Logo, or Scytek Logo all have the same circuit board and program the same FCC ID: MKYMT9207TX (Alternate Spelling: MKYMT92O7TX) Circuit Board #: TXPT4-1 Frequency: 433 MHz LED color: Blue 5 buttons Battery: (1) GP23A
|
|
|
COMPATIBLE W/ THE FOLLOWING SYSTEMS: Ready to Program - Battery Installed TESTED - working 100% -remote will have Galaxy Logo, Astra Logo, No Logo, or Scytek Logo all have the same circuit board and program the same
|
|
|
ASTRA 200 600 777 4000RS (4000 RS , 4000-RS) 4000RS-2W-1
|
GALAXY 2000RS SERIES - DBP 2000RS-MDL 2000RS-2W1DBP 5000RS SERIES – DBP 5000 RS–2W Plus |
|
Ready to Program - Battery Installed TESTED - working 100% -remote will have Galaxy Logo, Astra Logo, No Logo, or Scytek Logo all have the same circuit board and program the same PROGRAMMING THESE REMOTE(S) Adding/Replacing Transmitters To replace lost or stolen transmitters or to add additional transmitters into the system, have all desired transmitters ready and follow the steps below. Note: Up to 4 one-way transmitters can be programmed to operate the system. Any previously stored transmitter codes will be erased if they are not programmed within the following sequence. To program the transmitter(s): 1. Turn on the ignition key On, Off, On, Off, and back On. (Key On 3 times) The siren will chirp 3 times. 2. Press and hold the Override switch for 5 seconds. The siren will chirp 5 times. The LED will illuminate. 3. Press Button 1 on the first transmitter. The siren will chirp once. 4. Press Button 1 on the first transmitter again. The siren will chirp twice to indicate it has learned the code. 5. Repeat steps 3 for each additional transmitter (up to 4). 6. Turn off the ignition key. |
100% Guarantee Remote Shipping / Return Policy
We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.
Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.
Does this keyless remote entry come with a battery?
Yes. It will have a working battery installed.
Battery Condition:
A. All remotes sold on Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply working.
Some are new and some are used.
Your vehicle will be installed
with one of the following keyless entry systems:
a. Standard Keyless Remote Packages: Installed at time of manufacture.
b. Optional Keyless Remote Packages: Installed by a dealer.
c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.
d. No remote keyless entry system at all.
The above information can change which remote you
need
for your installed remote keyless system.