I purchased this cutter new and it has literally never failed me. Video link below. I am selling because I am upgrading to cutting thicker stuff in the 45 amp range. I mostly cut 16g-14g and did cut 3/8” once or twice. It will arrive in the original case, with strap, power adapter to use 250 volt (which is what I used) all of the original instructions and pamphlets, the plasma torch cable and ground cable. I replaced the ground clamp as it was old and weak. It has also been adapted to monitor arc voltage it you want to (red and yellow wires coming out of top case) or monitor cutting amps if you want to (white cable on top that hooks to an auxiliary amp gauge). Neither of these are required for use and are just a bonus to the expert user. I am also including a BUNCH of new consumables as well as some half work out but still good ones. They include - 6 new nozzles, 7 electrodes, 2 new deflectors, and 2 usable deflectors 1 usable shield (for drag cutting - it will be already installed on the torch when it arrives), and finally 1 extra swirl ring. This is almost 250$ worth of extras.

If you need to know the specs on this machine please just google around. This is a very common and reliable machine. Its max is rated at 30amps, but at 240v I have measured 34amps at the torch. Its duty cycle is rated at 30%. In the 100 degree summertime in a hot shop if you cut too long you’ll bump up against that limit. Sorry for the shipping, this box is 40 pounds and 32x12x25

Here is a quick demo of it working.

https://youtube.com/shorts/kS4fUNq1GGg?si=27CfUZUszGRBcNGr