4.0 HP Outboard Motor 4-Stroke Air-cooled Single Cylinder 53.2CC Boat Engine NEW

Key Features

Built to Brave: Crafted from tough aluminum alloy, this product laughs off rust and corrosion—whether you're on a salty sea or a serene lake, it's built to stick around for adventure after adventure!

Stable Performance: With a 4.0-HP 4-stroke engine and 3-blade propeller, this product serves up strong, steady thrust to glide through waves, ensuring smooth operation, stable speed, and consistent performance!

Practical and Efficient: With a 53.2cc engine and a fuel consumption rate of just 16.93oz/h, it delivers efficient performance. Featuring an air filter that removes impurities, it safeguards precision components and enhances durability. Plus, the cruise control handle adds convenience and enjoyment to your time on the water.

Propeller Protection: The protective shield guards against impacts and aquatic plant interference, ensuring your motor stays safe and your journey remains smooth.

Quick Start: A smooth pull-start mechanism fires up the engine in a snap—so you can skip the fuss and dive straight into your aquatic adventures without a hitch!

Details

Practical Fuel Tank: The 0.32-gallon fuel tank holds enough fuel for extended trips while not adding excessive weight, reducing the frequency of refuelling.

Heat Dissipation Holes: They prevent overheating that could harm the motor and keep it stable during use.

Application

It is suitable for freshwater and saltwater environments. It can be used for inflatable boats, fishing boats, sailboats, small yachts, etc., with a weight of 220.46 lbs or less and a load capacity of 2-3 people.

Specification

Material: Aluminum Alloy

Assembly Required: Yes

Starting Method: Manual Pull Start

Engine Type: 4-stroke, Air-cooled, Single Cylinder

Displacement: 53.2cc

Horsepower: 4.0 HP

Maximum Output: 1.5KW

Maximum Speed: 6800rpm

Thrust: 350kg/771.62 lbs

Applicable Boat Size: 2.3-4m/7.55-13.12ft

Recommended Gasoline: #90 or Above

Engine Oil Capacity: 0.6L/0.16Gal

Fuel Tank Capacity: 1.2L/0.32Gal

Fuel Consumption: 480g/16.93oz/h

Engine Head Size: 28*24cm/11.02*9.45in

Product Total Height: 113cm/44.5in

Package Size: 120*30*26cm/47.24*11.81*10.24in

Gross Weight: 10.5kg/23.15lbs

Net Weight: 8.25kg/18.19lbs

Package Included

1* Outboard Motor

1* Toolkit

Other Needed Accessories

Notes

• Before purchasing, please carefully confirm that the parameters of the product are compatible with your boat.
• We highly recommend using #90 or above unleaded gasoline. Please use only 4-stroke engine oil and avoid using mixed fuel designed for 2-stroke engines, as it could lead to spark plug carbon deposits, blocked exhaust ports, or stuck piston rings.
• To start the engine manually, first, gently pull the handle 4 to 6 times. Next, pull the handle slowly to tighten the pull rope, and then quickly pull it to initiate the engine start-up. If starting is difficult due to fuel overloading, you may remove the spark plug. After that, fully pull the choke handle 5 to 6 times. Once done, reinstall the spark plug securely. Finally, follow the aforementioned steps to restart the engine.
• When the equipment is not in use, please place the fuel tank on a level surface to prevent oil from accidentally entering the air filter or muffler.
• Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.