One (1)

aftermarket remote keyless entry fob alarm

Transmitter control clicker keyfob controller replacement

1-Way Replacement Remote Control Transmitter

FUNCTIONS AT 100% TESTED & GUARANTEED

Prestige / Pursuit / PRO /

Excalibur / Omega

 

 

FCC ID: ELVATNC

Omega Excalibur: 173BP APSRS3Z

Frequency: 433MHz 433 MHz

Batteries; Installed 2: CR2016

LED color: Red

  1-way keyless entry/remote start car transmitter

Prestige 173BP 3-Button 1-Way Remote Control Transmitter

3 buttons

Works With or Replaces The Following Remotes:

  • 141BP
  • 141BPR
  • 143BP
  • 143BPR
  • 145BP
  • 171BP
  • 171BPR
  • 173BP

 

Compatible with the following systems:

  • APS25E
  • APS501E
  • APS57E
  • APS901E
  • APSRS1Z
  • APSRS3Z
  • PR1B
  • PR71B
  • PRO9051Z
  • PRO9056E
  • PRO9556E
  • PRO9644E

 

 

Programming:

Standard Programming: This method is used to program additional or replacement transmitters. Before you begin, have all transmitters which are to operate the system at hand.

  1. Turn the ignition key to the on position..
  2. Press and release the valet/programming switch 3 times (Siren Chirps).
  3. Press the Lock Button of each transmitter you want programmed until you hear a chirp from the horn or siren.
  4. Turn the ignition switch off.

The above action programs the Lock, Unlock, Start/Trunk, and Option 1 buttons which are typical for most systems. For additional channel programming beyond the option 1 button, you can use any unused button or combination of buttons not in use.

In other words, to access option channel 5, 6, 7, you would do the following:

From step 3 above:

  • a.) Press and release the valet/programming button 4 additional times to get to channel 5, then press any unused transmitter button or button combination to program.
  • b.) From a, press and release the valet/programming button 1 time to get to channel 6, then press any unused transmitter button or button combination to program.
  • c.) From b, press and release the valet/programming button 1 time to get to channel 7, then press any unused transmitter button or button combination to program

NOTE: Not all systems have channels above 3, check with your installation center for options your system may or may not have.

NOTE: Certain systems have the ability to utilize channels 6 and 7 for driver priority programming. For driver priority, the vehicle must be equipped with this feature, and the optional feature must be set up and installed by your installation center. Once this feature is added when the unlock button of transmitter 1 is used, it will set driver 1 priority, and when the unlock button of transmitter 2 is used it will set driver 2 priority. In this situation, the unlock button can be programmed into two receiver channels, unlock, channel 2 and driver priority 6 or 7. In no other circumstance will the system allow a transmitter button to be programmed into 2 receiver channels at the same time.

NOTE: Please make sure you have a working control unit installed in the vehicle prior to ordering this remote control. Programming instructions are listed above and will require accessing your valet/programming switch.

   

100% Guarantee Remote Shipping / Return Policy

Warranty/Returns:  

1.     We have a 30 day return policy. 

2.     All returns for replacements and refund need an RMA #.

3.     Please contact us before returning items so we can give you the RMA # and the proper return address.

4.     No refunds / replacements will be granted without an RMA#

 

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

 

Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.

 


 
Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.