1 ready to program TESTED Working 100% Battery installed green LED

See pictures for an example of what you will receive

This item is pre-owned – it will work like new once programmed to your vehicle

 One (1)

Aftermarket remote keyless entry fob alarm

Transmitter control clicker keyfob controller replacement

Functions at 100% Tested & Guaranteed

Carbine

 

FCC ID: ELVMTOB

Interchangeable FCC IDs:

ELVMTOB

ELVMT0B

ELVMTOA

ELVMT0A

Interchangeable circuit board #s

MT9C

MTOG A46

Frequency: 433 – 434 MHz

LED color: Green

4 buttons

Battery: (2) CR 2032

 

 

 

Compatible with the following systems:

 

For use with models: 6918A, 7904A, 7919P, 7921P 


ALSO: 

Silencer Plus-4500


Silencer Plus-4600

Silencer Plus-4700

Silencer Plus-5500

Silencer Plus-5600

Silencer 6981A

Silencer 7904A

Silencer 7919P

Silencer 7921P


Plus-4500

Plus-4600

Plus-4700

Plus-5500

Plus-5600

 

Programming Instructions:

Please Note: Remote programming requires either a push button valet or override toggle switch

Programming the Remote Transmitter (Includes the Standard Type and LCD Transmitter Type)

Note: This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is exceeded, the security system will start deleting transmitters from memory in chronological order.

With the ignition switch in the OFF position, turn the ignition switch On - Off - On - Off - On.

Before 15 seconds has passed, push and release the valet switch 3 times holding the button down on the 3rd press. Wait until a long chirp or beep is heard. Release the button. You are now in transmitter programming mode.

Press the “Lock” button on the first transmitter until you hear a confirmation chirp/beep. The transmitter is now coded into the system. Repeat for each additional transmitter. When finished, either turn off the ignition key or wait for 15 seconds to get out of transmitter programming mode. You will hear 3 long chirps/beeps and 3 parking light flashes to indicate you are out of transmitter programming mode.

PROGRAMMING THE ALARM FEATURE

With the ignition switch in the OFF position, Turn the ignition switch On - Off - On - Off - On - Off. Before 15 seconds has passed, push and release the valet switch twice holding the button down on the 2nd press. Wait until 1 short and 1 long chirp or beep is heard. Release the button. You are now in “Alarm Feature Programming (Group 1)” mode.

P

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV id’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used. 

Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.