Saramonic Blink 500 Wireless Lavalier Microphone System --- Blink500 B1 1 Transmitters with 1 Receiver

The Saramonic Blink 500 is an incredibly lightweight, ultracompact and easy-to-use wireless microphone system for DSLR, Mirrorless and Video cameras, or mobile devices that delivers detailed broadcast-quality sound. The RX receiver has a 3.5mm output and includes TRS and TRRS output cables, allowing it to work with any device with a 3.5mm audio input.

The clip-on transmitter has a great sounding built-in mic and it is small and light enough to clip to shirts and clothing, or you can use it as a traditional belt pack transmitter with the included SR-M1 professional lavalier microphone. No technical knowledge of audio is required to operate.

saramonic blink500

2.4 GHZ Operation System

No technical knowledge of audio is required to operate. The Blink500 system operates on the interference-free 2.4GHZ spectrum and automatically hops to free channels to avoid static noise and audio dropouts.

Type-C Charging Port

Saramonic Blink500 is with built-in battery, supports Type-C charging.

Note: Built-in antennas are at the bottom. So when you use this mic kit, pls keep the antenna upward.

saramonic blink500

Specifications of Saramonic Blink500 B1 Wireless Microphone Kit:

  • Transmission Type: 2.4GHz Digital Frequency
  • Modulation: GFSK
  • Operating Range: Up to 164ft (50M)
  • RF Output Power: 10mW
  • Polar Pattern: Omnidirectional
  • Maximum SPL: Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL
  • Sensitivity: Built-in Microphone: -42dB Lavalier Microphone: -30dB
  • SNR: >78dB
  • Power Requirements: Built-in Li-ion Battery or USB-C DC 5V

saramonic blink500

Specifications of Saramonic Blink500 B1 Wireless Microphone Kit:

  • Built-in Battery Life: Approx 6 hours
  • Antenna: PIFA Antenna
  • Audio Input: 3.5mm TRS Lavalier Microphone Input or Built-in Microphone
  • Audio Output Connector: 3.5mm Jack
  • Audio Output Level: -60dBV
  • Weight: Approx 34 (1.2 Oz)
  • Dimensions: 63*43*16.5mm
  • Operating Temperature: 0 to 50 degree
  • Storage Temperature: -20 to +55 degree

Saramonic blink500

Blink500 Receiver

Type-C charging port.

When the receiver is ready to pair, push both up and down level buttons on the TX transmitter.

Note: Built-in antennas are at the bottom. So when you use this mic kit, pls keep the antenna upward.

Saramonic blink500

Blink500 Transmitter

The Blink500 Transmitter can adjust the sound volume. Three-volume light indicates 6 volume levels.

Built-in battery and microphone included.

To pair the transmitter to the receiver, take the pairing pin to press the internal band

Saramonic blink500

Blink500 B1 Work With Camera

Lightweight, ultracompact and easy-to-use 2-person wireless microphone system for Cameras.

Good choice for broadcasting, interviewing, and vlogging

saramonic blink500

Blink500 B1 Work With Smartphone

With a gold-plated 3.5mm TRS to TRRS Output Cable, Blink500 can work well with smartphones and tablets.

It can also clip to your shirts and clothing easily.

saramonic blink500

Package List:

  • 1x Blink500 RX Receiver with Built-in Clip and Camera Shoe Mount
  • 1x Blink500 TX Transmitter with Built-in Microphone and Clip
  • 1x 1(30.5 cm)gold-plated 3.5mm TRS to TRS Output Cable for Cameras
  • 1x 1(30.5 cm)gold-plated 3.5mm TRS to TRRS Output Cable for Smartphones and Tablets
  • 2x 1(30.5 cm) Gold-plated USB-C to USB-A Charging Cables
  • 1x SR-M1 Omnidirectional Lavalier Microphone
  • 1x Alligator-style Lavalier Microphone Clip
  • 1x Foam Lavalier Windscreen
  • 1x Pairing Pin
  • 1x User Manual