The codes of up to three transmitters can be read into the keyless receiver unit memory. 
(If a fourth code is stored, the code which was input first will be erased.)

NOTE: It is important to maintain the time limits between the steps. Make sure the doors 
and the hatch are closed.

1. Turn the ignition switch ON (II).

2. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed
at the receiver under the audio unit.

3. Within 1 to 4 sec., turn the ignition switch OFF.

4. Within 1 to 4 sec., turn the ignition switch ON (II).

5. Within 1 to 4 sec., push the transmitter lock or unlock button with the

transmitter aimed at the receiver under the audio unit.

6. Within 1 to 4 sec., turn the ignition switch OFF.

7. Within 1 to 4 sec., turn the ignition switch ON (II).

8. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter 
aimed at the receiver under the audio unit.

9. Within 1 to 4 sec., turn the ignition switch OFF.

10. Within 1 to 4 sec., turn the ignition switch ON (II).

11. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter 
aimed at the receiver under the audio unit.

12. YOU SHOULD NOW HAVE HEARD THE SOUND OF THE DOOR LOCK ACTUATORS!

Within 1 to 4 sec., push the transmitter lock or unlock button again.

13. Within 10 sec., aim any remaining transmitters (up to two additional ones)

whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. 
Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored.

14. Turn the ignition switch OFF, and pull out the key.

15. Confirm proper operation of the transmitters.

Green Circuit Board Inside Case Says : G8D-355H-A

Available in Memory #1 & Memory #2 & No Memory Position  

How to find out if this remote is compatible with your Vehicles’ installed RKE System

If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.

1.   Check the back of your current or old keyless remote to match FCC ID /Part #’s.

2.   Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.

Your vehicle will be installed with one of the following keyless entry systems:  

  a. Standard Keyless Remote Packages: Installed at time of manufacture. 

  b. Optional Keyless Remote Packages: Installed by a dealer. 

  c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop. 

  d. No remote keyless entry system at all.

The above information can change which remote you need
for your installed remote keyless system.

Payment:  We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments.  Payment is expected within 5 days

PA SALES TAX:  As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.

Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).

100% Guarantee Remote Shipping / Return Policy

Warranty/Returns:  

1.     We have a 30 day return policy. 

2.     All returns for replacements and refund need an RMA #.

3.     Please contact us before returning items so we can give you the RMA # and the proper return address.

4.     No refunds / replacements will be granted without an RMA#

We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.

Please Note: Each remote and circuit board is UV ID’d prior to shipment  – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.

  Does this keyless remote entry come with a battery?  

Yes. It will have a working battery installed.

Battery Condition:

        A. All remotes sold on Keyless4u include working batteries.

        B. Installed batteries are not tested for battery life- they are simply working.

             Some are new and some are used.