Features:

-Extendable

-Custom-made FX and sound chip with many sound effects

-Interchangeable Emmiters(4 emmiters included)

-Packaging resembles the diary of the 11th Doctor

The black handle is made from Black Rubber

Flickability is very smooth.

Total four light modes: interchangeable by yourself

Tap and hold.

Two long presses.

Three long presses.

Tap four long press (different light frequency conversion speed)

Four down for the film and television drama fishing mode, do not need to press the button will also have sound and light

The eleventh metal parts are all cnc made, the yellow part is made of brass and the silver part is made of aluminium alloy. The black part is made of faux leather with drip glue.

11th can be retracted to open the ‘claw’, just like the drama can be unfolded by directly dumping a little, remember to use for the first time a little bit harder, more than a few times will become smooth.

Putting away the claw part is recommended to grasp the main body with one hand, one hand first put away the four paw claws in the back press, this can reduce the loss.

The driver has a sound effect switch at the bottom of the driver, this time equipped with four sound effects, respectively, press and hold the black button 1, 2, 3, 4 times. The fourth for the 2010 Christmas Special: A Christmas Carol appeared in the sonic screwdriver ‘fishing’ sound effects, the sound effects only need to be pressed out to release the hand will continue to sound (is normal, not bad)

In addition to the green head there are blue, white, red three kinds of replacement head, the replacement method is to shake off the four claws and then unscrew the head can be.

Battery replacement method, the use of seven batteries powered, unscrew the bottom of the starter can replace the battery.

Play Note: 

1. Do not rotate the middle of the starter (co and seven20 version of the 11 battery replacement part, Doctor Who11 that is full of lines, turn will make the line disconnect, resulting in damage)

2. Due to all metal cnc production, some metal parts are relatively sharp, pay attention to play safety!

3. If the starter into the battery does not respond, the first is to check whether the starter battery is correctly loaded, + up (raised part), the second is the battery installation is not a problem, that is, the bottom is not linked to the tight, screwing force on the line.

4. Remember to turn off the switch after you finish playing with it, it can reduce power consumption.

5. This is a prop toy, normal play, including vigorously dumped are no problem, but vigorously and violently is certainly not the same!

Violent play will certainly be more rapid loss, metal parts loss is irreversible.

6. Metal parts, so and metal 12 blue the same, will oxidation, but and 12 blue different point is 12 blue for fading, copper and aluminium for oxidation black, loss of luster, this as long as with the metal can not be avoided, you can slow down the oxidation of the oil rubbing and other methods, the simplest way is to play the finished back to the box.

7. The light effect is flashing, not bright or always bright. If the switch is open and the battery is replaced, the button there is no problem.

The black part of the light can be solved by twisting, slowly adjusted in small increments, but do not turn it on! It is not the switch and the battery is dead

The case of strobe, do not light, often light is because the internal space is narrow, so fling the retractable claw when the line is easy to wrap together, which leads to this situation. This situation is not a short circuit, is available through the black part of the twist to let the wire a little loose to solve. Do not unscrew, slowly debugging can be!

Specification

Version：11th

Size:25*13*5cm

Material:Copper and Molybdenum Alloy

Package Icnluded

1*Doctor Who Screwdriver (Battery included)