LED curing light 1400mw/cm²
Product Description
Parameter：
Wavelength：440-480nm
Light power：5W
Intensity：800-1400mw/cm²
Battery：Li-on 800mAh
Input voltage：AC100-240V, 50/60Hz 0.4A Max
Output voltage：DC 5V/1.5A
Net Weight：155g
Mode selection：P1, P2, P3
Solidification time：1S,3S,5S,10S,15S,20S
Features:
·Produce the maximum light intensity safely.
· A high intensity of 1400 mW/cm2.
· Offers extremely short curing times of no more than 3 seconds.
· Cordless, highly portable and light weight (only 155g).
· High-performance Li-ion battery technology.
· LED panel conveniently indicates a countdown curing time.
· Battery can be fully recharged in 90 minutes.
· Battery with protection against over-voltage, over-current and short circuit.
· 3 versatile curing modes for every indications.
· Automatic power off, low battery alert.
· Color : White .
Operation conditions:
Packing list:
The host * 1
Metal lamp holder *1
The silicone base *1
Power adapter *1
Disposable protective sleeve *1
Shade plate *1
Product specification *1
·························································································
LED curing light 2000mw/cm²
Features
NAME：LED curing light
MODEl：YS-C
This high power 2000mw/c㎡ LED Curing Light has a humanity intelligent chip with a high intensity
LED light and Li-on rechargeable battery.
This device can cure all the dental resin known in the market nowadays; with a performance level far
superior than the halogen curing light's, it has 3 different working modes and it can solidify 4-5mm
deepness in a few seconds.
Benefits：
1)Very convenient to operate.
2)Small size,cordless and light weighted.
3)No dazzling strong light which allows you to aim the light to the exact position and improve the effectiveness of the treatment.
4)No vibration.
5)Noiseless operation.
6)High power rechargeable battery.
7)High powerful light intensity with a maximum reach of 2000MW/cm2.
8)3 different working time modes,exposure time for optional curing:8s/6s/4s.
9) You can select the correct mode according to the different types of material you wish to cure,their speed of reaction,and the clinical protocol you are following.
Best Quality Materials:
* Mono-fibered glass light guides for various applications.
* Anodized aluminum handpiece.
* Latest generation of CMS electronics.
* Very high-quality single L.E.D.
* Li-lon battery with no memory effect
Design and Ergonomics:
* Silent and hygienic, no fan.
* Round surfaces allow for easy and comfortable manipulation.
* Compact, lightweight and well-balanced light guide rotates through 360°.
* Base-charger can be turned in all directions and low battery warning.
* Can be used anywhere in the world. The voltage input is 110V-240V and we will provide you
with the correct adapter according to the shipping destination.
Specifications:
- Blue Light Intensity: 2000mw/c㎡
- Rechargeable Li-ion battery
- Spectrum Range: 420nm- 480nm
- Power Adapter: AC110-230V / 50-60Hz
- Time option:8s/6s/4s
- Weight: 0.65kg
-Full Metal shell
Package Includes:
1 High Capacity Rechargeable Battery
1 Charger
1 Charger Socket
·························································································
Dentex etching gel is a polymer thickened gel for use on enamel and dentin.
This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding.
The polymer thickener creates thixotropic properties, enhancing handling characteristics.
The etchant rinse away cleanly and quickly, leaving no residue.
Packages: Refill: 5ml/syringe, Instruction X1
Indications:
Treat dentin and enamel, treating agent on dental restorative material.
1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water.
2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds.
Etching time should be monitored with a stopwatch. begin timing at the end of application.
Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time.
3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant.
4. Remove exces moisture from the tooth and proceed with the applicaton of etching gel, waiting for 10 seconds, then rise thoroughly.
·························································································
Description:
9.5% Porcelain Etch is an Etchant to make porcelain surface treatment.It is used on ceramic based crown,veneer,inlay and onlay.It can roughen the surface of porcelain and enhance the bonding strength.
Packages:
2.5 ml/syringe
3X Disposable Tips
Instruction
Warning:
Protective measures must be taken by patient,operator and assistant.
Don’t use this product until you have thoroughly read and understood the instruction.
FDA Statement
The
sale of this item may be subject to regulation by the U.S. Food and
Drug Administration and state and local regulatory agencies. If so, you
can bid on this item only if you are an authorized purchaser. If the
item is subject to FDA regulation, I will verify your status as an
authorized purchaser of this item before shipping of the item.
Seller name:Dentistlove
City,State:GuangDong,China
Telephone number:075523387589
Re: K192233
Trade/Device Name: LED Curing Light
Regulation Number: 21 CFR 872.6070
Regulation Name: Ultraviolet Activator for Polymerization
Regulatory Class: Class II
Product Code: EBZ
Dated: December 7, 2019
Received: December 16, 2019
