STOCK CLEARANCE

Save £30

This item is located at Lamb’s Conduit Street, London, WC1N.

Finest quality, dip moulded latex product.

All products have been assembled, inspected and tested in the Denber Rubber's UK factory.

*Dip moulding is manufacturing process that takes heated metal moulds and dips them into liquid latex to form the garment without seams.

Gender: Female

Color: Black

Material: Latex

Main Latex Thickness: 0.40mm

The following table is an approximate guide to dip moulded sizes compared to UK sizes:

Waist Sizes:

Small     Medium   Large     XL

53cm     61cm     71cm     81cm

Photos courtesy of Denber Rubber.

For all latex and rubber items, before use, we recommend:

• Wash the garment in the shower with lukewarm water to remove all traces of polish, talc, dirt, etc.; if needed, you can use a mild soap with a balanced PH level (the same one that you use for your body is fine) for stubborn areas.
• Drip/Air dry by hanging the garment on a plastic or wooden clothes hanger (avoid metal ones, in fact try to avoid having the latex, especially light coloured one, coming in contact with metals as it can stain…also with perfumes by the way).
• When dry, apply a silicone based dressing aid inside and out.
• Use a cover bag, like the ones you get when you get your clothes back from the dry cleaners, and store in your wardrobe away from direct sunlight. Check periodically to see if the latex requires a top-up.
• When you are ready to wear the garment, apply a silicone based dressing aid on your body where the latex will make contact with it (it should already be lubed on the inside) THIS WILL MAKE SURE THAT YOU AVOID SNAGGING AND POTENTIALLY TEARING THE GARMENT; finally, apply it on the outside for a shiny result!