This product is a professional-grade DC12V 16-in-1 Visual Automotive Cleaning and Maintenance Machine. It innovatively integrates a borescope, allowing you to SEE and precisely clean critical components that are beyond the reach of traditional tools. This single unit comprehensively covers deep cleaning and maintenance for the fuel system, intake system, emission system (catalytic converter), AC system, and cooling system, while also including practical functions like brake fluid extraction. It is the ultimate tool for auto repair shops to enhance service capabilities and profitability, as well as for seasoned DIY car owners to perform professional-level maintenance.

Voltage:	DC12V
Flushing Pressure:	0-116 PSI (0-8 BAR)
Borescope Camera Resolution:	1 Megapixel
Borescope Cable Length:	6.56 ft (2m)
Borescope Cable Diameter:	0.31 inch (8mm)
Tank Capacity:	3 x 0.26 Gallon (1L) Tanks + 1 x 2.64 Gallon (10L) Tank
Power Cable Length:	9.84 ft (3m)
Cleaning Hose Quantity:	3 Pieces
Adapter Kit Quantity:	33 Pieces (Compatible with VW, Toyota, Honda, etc.)
Spray Gun Type:	Visual AC Evaporator Cleaning Spray Gun
Compatible Cleaning Agents:	Oil-based (for Fuel System & Oil-type Intake/Exhaust Cleaning) + Water-based (for Combustion Chamber Foam Cleaning, AC Evaporator Cleaning & Aqueous Catalytic Converter Cleaning)
Operating Temperature:	32℉-104℉(0℃-40℃)
Cleaning Hose Length:	6.56 ft (2 m) per piece
Net weight/Gross weight:	57.3lbs(26kg) / 68.3lbs(31kg)

• Wear colourless glasses as far as possible to avoid gasoline spraying to the eyes.
• Do not smoke or ignite near the cleaning machine to avoid fire and explosion. Do not use mobile phone and AC 220V working(DC12V).
• Combustibles or sparks and other articles are strictly forbidden to approach the cleaning site, and irrelevant personnel and children are strictly forbidden to approach the working site.
• Do not allow fuel and cleaning fluid to flow to the engine when taking over.
• The working site shall be in a well-ventilated place as far as possible to avoid inhaling the waste gas such as nitrogen compound into the body.
• The working site shall be equipped with fire extinguishers and other fire protection equipment.
• Do not inhale the cleaning liquid mist emitted by the cleaning machine and the engine.
• Open the fuel tank cap before operation.
• During cleaning, if there is leakage at the cleaning equipment and each interface, it shall be handled immediately, and then other connecting pipes shall be removed.
• During cleaning, if there is leakage at the cleaning equipment and each interface, it shall be handled immediately before cleaning.
• The cleaning liquid cylinder of the equipment is under maximum pressure of 10 kg/cm2, but the air supply pressure shall not make the cylinder under pressure more than 8 kg/cm2 during use.
• Do not use the cleaning agent not specified by the original manufacturer to maintain the service life and cleaning effect of oil valves, rubber and other parts in the machine.
• Please read and understand the operating procedures of the machine in detail before use, so as to maintain the machine in the best condition and reduce the occurrence of faults.
• It is forbidden to clean the tank cover without tightening.
• Please take all safety precautions during operation.5)Operate the four wheels successively until the old oil is drained out and the new oil is suctioned out without bubbles.(Note: It usually takes a long time to operate the first wheel.)
• Dismantle the special connector after replacing the brake oil of four tires, add appropriate new oil to the brake oil reservoir according to the liquid level, test the brake to see whether it is normal, and check whether each exhaust valve leaks.(This step is important and must be done.)

Visual Precision Operation with Visible Results: The exclusive built-in borescope allows for direct observation of carbon deposits and grime inside components like the catalytic converter, combustion chamber, and evaporator. This transforms maintenance from "blind flushing" to "targeted cleaning," ensuring every service is genuinely effective.

Comprehensive Deep Maintenance with All-in-One Versatility: Sixteen professional functions are integrated into one machine, providing a complete solution from power (fuel, intake) to emissions (catalytic converter), and from AC health (evaporator) to cooling efficiency (radiator, condenser). It eliminates the hassle and cost of purchasing multiple single-function devices.

Professional Emission Treatment for Easy Compliance: Specifically designed for gasoline vehicles, it offers water-based cleaning and restoration functions for the catalytic converter. It effectively clears blockages, restores conversion efficiency, and significantly reduces exhaust emissions, making it a powerful assistant for passing stringent emission tests.

Simple Operation for Multiple Scenarios: Powered directly by a standard 12V car battery for plug-and-play convenience. Its user-friendly design, coupled with dedicated adapters and spray guns, caters to the primary cleaning needs of both gasoline and diesel vehicles. It's easy to use for both fast-paced professional shop workflows and meticulous personal car care.

Enhanced Efficiency & Value with High ROI: For shops, it expands high-profit services (e.g., evaporator and catalytic converter cleaning), boosting revenue per customer and work efficiency. For car owners, a single investment enables long-term, professional maintenance akin to dealership service, saving significant repair costs and offering outstanding economic value.

Given the extensive functionality of this machine, with varying operating procedures for each feature, the detailed step-by-step instructions are no longer displayed here. Please refer to the included English manual for full operating guidelines. If you would like to understand the usage process before making a purchase, please feel free to contact us to obtain the English manual.