Gas Thermocouple, M8 Thread Heating Gas Burner Thermocouple Probe 600mm for Fireplace BBQ Grill Accessories, for BBQ Grill or Fire Pit Heater or Gas Water Heater


Product Details

  • Product Dimensions : 0.39 x 0.39 x 0.39 inches; 1.23 ounces
  • Item model number : East buydugs0kzwy6
  • Manufacturer : East buy
  • Brand: East buy
  • Item dimensions L x W x H: 0.39 x 0.39 x 0.39 inches
  • Material: Metal
  • Style: Modern
  • Measuring Range: 20-25 °C - 800-1000 °C
  • ✔【Gas Thermocouple Material】: The fire pit gas control valve kit are made of high quality metal material with heavy-duty construction for durable use.
  • ✔ 【Application】: Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater,The probe is highly sensitive and can sense temperature fast.
  • ✔【Size: Thermocouple Length】: 600mm/23.62inch,Probe: about 17mm/0.67in,Suitable for gas heater, brazier, oven, water heater, etc.
  • ✔【Thermocouple plays the role of a sensor】:it senses the flame, will transmit a signal to the solenoid valve in the control valve, the solenoid valve receives the signal before opening the gas, in order to successfully ignite and keep the flame does not go out. So in the installation, the control valve and thermocouple should be well connected, so the control valve will receive the signal transmitted by the thermocouple, it will pass gas and ignite.
  • ✔ 【Notice】The thermocouple and ignition needle in the installation of the distance should be closer, so the thermocouple can sense the flame and the solenoid valve receive the induction, pass gas and ignite.

Features:1. It has fast response speed and stable performance.2. High quality terminal connectors ensures convenient and stable connection.3. The probe is highly sensitive and can sense temperature fast.4. Gas assembly with M8*1 tip and nut. 5. Suitable for gas heater, brazier, oven, water heater, etc. Install Steps:1. Install the thermocouple tip on a board and use two nuts to fix its location2. Keep the tip about 5mm from the burner hole.3. Fix the thermocouple nut M8 on the valve end tightly (Check if your valve end thread is 8mm before your buying)4. Connect two flat terminals well with the current tilt switch terminals.5. Turn on the gas and push your valve 5-10s till the thermocouple end is heated.6. Release your hand and it work well. If failed, please checkSpecifications:Condition:100% Brand NewMaterial: metalColor: As Pictures ShownThe head of thread: M8*1Tail fastening screw: M8*1Probe Size: approx.5.5*1cm/2.2*0.4in(L*W)Overall Length: approx.60cm/23.6inProbe: about 17mm/0.67inWeight: Approx.50gPackage list: 1 * Thermocouple