PREMIUM D5S/D5R + H11 LED HEADLIGHT & FOG LIGHT COMBO
(6500K COOL WHITE • PLUG-AND-PLAY • REPLACE HID XENON)

---

— WHY THIS SET —
• Unified upgrade: D5S/D5R low beam (HID replacement) + H11 fog for a clean, modern 6500K match.
• Real plug-and-play: H11 plugs into factory socket; D5S/D5R is near 1:1 vs. OEM HID and interfaces with the original ballast—no bulky base or extra wiring.
• Focused beam with a defined cutoff to enhance night visibility and reduce glare.
• IP68 sealing and wide temperature range for stable output in rain, snow, heat, and cold.
• Robust thermal design (aviation aluminum + upgraded copper core + ~12,000 RPM fan) helps sustain brightness and extend lifespan.

— KEY SPECS —
• Color Temperature: 6000–6500K Cool White
• Working Voltage: DC 12–36V
• Operating Temperature: −40℃ ~ +80℃
• Waterproof Rating: IP68
• Beam Type: High/Low (vehicle-dependent)

• D5S / D5R / D5C (Pair)
– LED Array: 30× high-brightness CSP per bulb
– Rated Power: 240W (pair)
– Luminous Flux: up to 24,000 lm (pair)
– Form factor: near 1:1 vs. OEM HID; designed to interface with original ballast

• H11 (Pair)
– Rated Power: 60W (pair)
– Luminous Flux: up to 6,000 lm (pair)

— WHAT’S IN THE BOX —
• 2 × D5S/D5R/D5C LED headlight bulbs (pair)
• 2 × H11 LED fog light bulbs (pair)
Note: Packaging may vary.

— PERFORMANCE DESIGN —
• Precision emitter layout at factory focal position for a clean cutoff and improved sign readability.
• Full-aluminum chassis + upgraded copper base for rapid heat transfer.
• High-speed, low-noise fan (~12,000 RPM) maintains lumen output during long night drives.
• Consistent 6500K color across beams for a unified appearance.

— COMPATIBILITY NOTE —
Due to listing limits, the vehicle chart is partial. If your original headlight plug is D5S or D5R, these bulbs fit. Unsure? Send your vehicle year/make/model/trim (and a photo of the original bulb if convenient) and we’ll confirm quickly.
While engineered for wide CANBUS coverage, a small number of vehicles may need an extra decoder to eliminate warnings/flicker.

— INSTALL TIPS —
• Power off the vehicle; work one side at a time.
• Do not touch LED emitters; handle bulbs by the base.
• Ensure each bulb is fully seated/locked and the connector clicks into place.
• Re-aim headlights after installation to achieve a sharp cutoff and proper road coverage.

— WARRANTY & RETURNS —
• 5-Year Warranty — quality issues replaced free of charge.
• Hassle-Free Returns — free return and prepaid label available upon request.