For Ender 5 Plus 377*370 mm Double Smooth/Texture PEI Bed w/ Magnetic

 377*370 mm double-sided PEI bed spring steel flex build plate, specifically designed for the Ender 5 Plus. Featuring a durable spring steel base. Both sides are coated with high-quality PEI textured and smooth on the other, providing superior adhesion during printing and effortless release once cooled, on whatever materials. What is included(Smooth/Textured): 1x DrFlex Flex Plate (Doubled Sided Mixed - Smooth PEI and Textured PEI) 377*370mm1x Spare Magnetic Pad 377*370mmWhat is included(Doubled Textured): 1x DrFlex Flex Plate (Doubled Sided Mixed - Textured PEI) 377*370mm1x Spare Magnetic Pad 377*370mm Printer Compatibility: Ender 5 PlusFeatures Double Sided PEI Coated Sheet (Smooth and Textured Surface)High Quality Ultem 1000 PEI Sourced from GE USA.Steel Sheet Thickness: 0.5mmSteel Plate Size (Bed Area): 377*370 (excluding handle) (Printable area may vary depending on printer setup)Suits variety of filaments, especially for PLA / PETG / ABS / TPU / ASADo note, measure your bed as printable area is not your bed size, bed size is usually 5-20mm larger than printable area.Magnetic Adhesive 300LSE 3MMagnetic Thickness ~1.5mmNote: Product photo is 235x235mm as a reference. Documentation: REMEMBER TO REMOVE PROTECTION FILM ON SMOOTH PEI BEFORE PRINTING. Contact us for additional information as ebay limited external links.  Tiny dots/bubble may appear on the Smooth PEI-Ultem surface. These can slightly affect the finished print bottom surface. However, they do not impact the printing process, reliability in any way. We do not consider these dots a reason for a warranty claim. These tiny dots/bubble gradually reduce over a couple of thermal cycle (prints jobs). Warranty claim is only for DOA/defective with steel sheet, PEI Film, textured finished. **Frosted/Texture PEI recommended for PETG and ABS/ASA prints but can also do many other materials, the smooth side should only be used with PLA, other materials will adhere but might form too much adhesion without the use of a release agent**. More Info. Only remove printed parts PETG off the texture side once cooled, removing while still hot could result damage to PEI sheet. Printable Spacers for springs suitable, if find spring is too loose due to a fixed limit switch. thingiverse part 2541312 Shipping Note: We ship items in a flat cardboard sandwich box to prevent warping during transit. This item cannot be combined with non-flat items for shipping, so please expect additional freight costs when bundling it with smaller parts or filament. If we can bundle smaller items within the same box, we will update the shipping total before processing your payment. Otherwise, feel free to contact support for a customised quote.