[Prewired set] Prewired electric guitar pickguard set with three pickups, three potentiometers, one 5-way switch and one single-cut toggle installed. Fits for standard U.S./Mexican Fender Start or Squier starts, perfect replacement for upgrading any common guitars configuration.
[Pickguard] 3-Ply thick pickguard of which the surface is covered with a film to prevent scratches and damage. And there are many pickguard colors for your choice.
[Pickups] There are two alnico 5 single coil pickups and one humbucker pickup wax potted to eliminate any unwanted feedback and noise.
[Easy to install] Everything above is already installed, including the output jack, just solder the ground wire to spring claw after receiving it.Please be ready to enjoy the perfect sounds.
[Customized package] Mounting screws and picks are included in package for free, and all the above are packed into a inserter and sturdy box with protective foam inside.

The surface of the product is covered with a film to prevent scratches and damage. Please remove the film before installing the product on the guitar.

Specifications:
Material: Metal, plastic, copper, magnets

Resistance: N/M/B: 6.5Kohm/ 6.8Kohm/ 14.5Kohm
Size: 285x220x60MM/11.22x8.7x2.4Inch ( L x W x T)
Weight: 700g/1.54lb

Package include:
1X 3-ply Guitar Pickguard
2X alnico 5 single coil pickups
1X alnico 5 humbucker pickups
1X 5-way switch
3X potentiometer 1V2T
1X single-cut Toggle

1X 473J 400V Caps (Made in USA)
1X Output Jack
11x screws



Importation Tips

When the Toggle is on, the neck pickup is active regardless of the setting on the 5-way.

1. Toggle on + 5-way at the bridge pickups = neck and bridge pickups work together.

2. Toggle on + 5-way at the middle pickups = neck and middle pickups work together.