What are Hub Centric Rings?

(Also called hubrings, hubcentric rings, centering rings)

This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.



Why do I need it?

You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.



How can I confirm fitment?

- Hubrings have 2 measurements, typically in millimeters (mm).

- The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 100.3mm. This should match your vehicle's hub bore.

- The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 110mm. This should match your wheel's centerbore.





Compatibility Information:

These hubrings can fit vehicles with a 100.3mm Hub. Your Wheel Bore must be 110mm. Message us with year/make/model if you have any fitment questions.



Important Fitment Notes - Required Buyers Check These Before Purchasing

- Buyers must ensure their Vehicle's Hub is 100.3mm.

- Buyers must ensure their Wheel's Centerbore is 110mm.

- If you are not unsure about fitment or the measurements, please do not guess. Send us a message and we are happy to help.



Installation Advisory

Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.

For Vehicles with 100.3mm Hub
AND
Wheels with 110mm Bore

  • StanceMagic Hub Centric Rings made of corrosion resistant polycarbonate plastic. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.

  • HUB RING INNER DIAMETER: 100.3mm (Your vehicle's hub lip diameter needs be this size)

  • HUB RING OUTER DIAMETER: 110mm (Your wheel's center bore needs to be this size)

  • Installation is simple and requires common tools used to remove/install rims and tires. Please note that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.

  • IMPORTANT: Before ordering, measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing. Installation is simple and requires common tools used to remove/install rims and tires. NOTE that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.
Quantity 4 pieces
Inner Diameter
(Vehicle Hub Size)		 100.3mm
Outer Diameter
(Wheel Bore Size)		 110mm
Material Polycarbon Plastic
Color Black

FITMENT INFORMATION

Compatible with vehicles with a 100.3mm hub that needs to center a wheel with 110mm centerbore.

Please see eBay's Vehicle Compatibility Table for a list of applicable vehicles

Important Notes



	
	 If you are not sure the hub size of your vehicle, please send us an eBay message and we will be glad to help

	 Please Verify the measurement of your VEHICLE BORE AND WHEEL before purchasing

	 eBay's Parts Compatibility Chart above should only be used as a guideline.

Legal Information



NOTE: This is an aftermarket/replacement component. The vehicle makes and models used in this listing are registered trademarks of their respective owners, and are used in this listing only to identify the vehicles to which this part fits.
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.