Physical | Size: 2.71 in. x 5.6 in. (68.90mm x 142.24 mm) – low profile | |||
Connector: Dual QSFP28 InfiniBand and Ethernet (copper and optical) | ||||
Protocol Support | InfiniBand: IBTA v1.3 a Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port | |||
Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR | ||||
Data Rate | InfiniBand | SDR/DDR/QDR/FDR/EDR | ||
Ethernet | 1/10/25/40/50/100 Gb/s | |||
PCI Express Gen3: SERDES @ 8.0GT/s, 16 lanes (2.0 and 1.1 compatible) Note: PCIe 3.0 x16 bus can supply a maximum bandwidth of 128Gb/s only (=16 * 8GT/s, including overhead), and therefore cannot support 200Gb/s when both network ports of MCX556A-ECAT run at 100Gb/s. | ||||
Power | Voltage: 12V | |||
Power | Cable | |||
Typical Power b | Passive Cables | 16.2W | ||
Maximum Power | Passive Cables | 19.0W | ||
1.5 Active Cables | 22.3W | |||
2.5W Active Cables | 24.6W | |||
Maximum power available through QSFP28 port: 5W | ||||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Airflow | ||||
Regulatory | Safety: CB / cTUVus / CE | |||
EMC: CE / FCC / VCCI / ICES / RCM | ||||
RoHS compliant | ||||