BUY IT NOW IS FOR ONE RACK ONLY
THE ASSORTED GEARS AND THE PHASE JOINER BLOCK ARE USED FOR DEMONSTRATION ONLY AND ARE NOT PART OF THIS SALE. THE JOINER BLOCKS ARE AVAILABLE IN ANOTHER LISTING IN OUR EBAY STORE.
WE ALSO HAVE THESE AVAILABLE IN 24" AND 12" LENGTHS. CHECK IN OUR STORE.
THESE WERE $160 EACH IN 2023. THEY ALSO HAD A MINIMUM ORDER OF 5 PIECES PER LINE ITEM.
THESE HAVE AROUND 367 TEETH. THEY ARE 36" LONG +/- 1/4". THESE HAVE A FACE WIDTH OF 1/4" AND ARE 5/8" TALL. THEY ARE 32 DIAMETRAL PITCH WITH A 20 DEGREE PRESSURE ANGLE.
WE ALWAYS TRY TO PUT THE ITEM STATS IN THE TITLE OF OUR LISTINGS. THIS WAY ALL OF OUR GEAR INVENTORY IS SEARCHABLE BY MATERIAL, PITCH AND TOOTH COUNT.
YOU MAY WANT TO PURCHASE A PHASE JOINER BLOCK FROM US IF YOU PLAN ON JOINING 2 OR MORE OF THESE TOGETHER. THIS BRASS BLOCK IS ESSENTIALLY A SMALL 4" PIECE OF THIS RACK. IT IS USED TO CORRECTLY SPACE THE 2 ENDS TOGETHER. THIS IS DONE WHILE TIGHTENING YOUR FASTENERS. THE BLOCK SETS THE SPACING PERFECTLY FOR ACCURATE ALIGNMENT. THIS MAKES FOR A SMOOTH TRANSITION WHEN A GEAR ROLLS OVER THE JOINT. BOTH ENDS OF THE RACKS ARE RANDOMLY SAW CUT. THEY ARE NOT PRECISION MACHINED. YOU MUST ADJUST THE ENDS TO CREATE A SUITABLE CONNECTION.
WARNING DO NOT OVER PAY FOR THESE FROM A MOTION DISTRIBUTOR !
SAME DAY SHIPPING IF PAID BEFORE NOON EASTERN TIME !
NONE OF THE EXTRAS OR MEASURING INSTRUMENTS ARE PART OF THE SALE. THIS MEANS THE MOTORS, SHAFTING, GEARS AND THE BRASS SPACER BLOCK OR ANYTHING ELSE IS USED FOR DEMONSTRATION ONLY AND IS NOT INCLUDED.
BUY IT NOW IS FOR ONE RACK ONLY
IF YOU PAY BY NOON EASTERN TIME I WILL MAIL YOUR PACKAGE THE SAME DAY !
BRAND NEW FROM SEALED ORIGINAL PACKAGING. THESE HAVE NEVER BEEN USED. TINY MILL SCRATCHES FROM HANDLING AND MANUFACTURING. MAY ALSO HAVE PATINA FINGERPRINTS FROM HANDLING. ALL OF THE TEETH ARE IN FLAWLESS CONDITION. VERY STRAIGHT AND FLAT WITH NO MORE THAN 1/16" FLEX THAT CAN EASILY BE CORRECTED WITH LIGHT FINGER PRESSURE. NOW STORED WITH DESICCANT IN A SEALED TUBE TO MINIMIZE HUMIDITY AS MUCH AS POSSIBLE. THESE ARE MAILED JUST LIKE YOU SEE IN THE PICTURES. THE RACK IS SUSPENDED IN THE MIDDLE OF A 3" TUBE AND THEN PADDED AT BOTH ENDS WITH THICK FOAM TO PROTECT THE ENDS. THE ENDS OF THE TUBE ARE TAPED SHUT WITH STRAPPING TAPE TO PREVENT THE CAPS FROM COMING OFF DURING SHIPPING.
THE SHIPPING IS COMPUTED BY YOUR ZIP CODE. WE DO NOT PROFIT FROM THE SHIPPING CHARGES. THE SHIPPING ON THESE IS A LITTLE HIGHER THEN NORMAL BECAUSE OF THE EXTRA LENGTH SUR-CHARGE.