• Specifications:
  • Model number: T10
  • Voltage: 9-14V DC
  • Current: 0.1A
  • Power: 1.2W
  • Lumen: 200LM
  • Lamp beads: 14pcs 2835SMD
  • Color: 6500k white (measured color temperature: 6192k) The following plugs are applicable:
  • T10, W5W, 194, 168
  •  
  •  
  • Features:
  • *Easy installation: small size, close to 1:1 with the original halogen lamp
  • *Excellent Heat Dissipation Construction: Our bulbs use built of lightweight and high-strength aluminum alloy as bulb body to keep themselves cool, even if they're used in constant-on applications like daytime running lights, they still illuminate non-fading brightness.   
  • 10X AUXITO T10 Bright LED License Plate Light Bulbs 6000K White SMD 168 2825 194

    Specifications:

    Model number: T10

    Voltage: 9-14V DC

    Current: 0.1A

    Power: 1.2W

    Lumen: 200LM

    Lamp beads: 14pcs 2835SMD

    Color: 6500k white (measured color temperature: 6192k)
    The following plugs are applicable:

    T10, W5W, 194, 168

     

     

    Features:

    *Easy installation: small size, close to 1:1 with the original halogen lamp

    *Excellent Heat Dissipation Construction: Our bulbs use built of lightweight and high-strength aluminum alloy as bulb body to keep themselves cool, even if they're used in constant-on applications like daytime running lights, they still illuminate non-fading brightness.   

    *Non-Polarity Design: Directly replace your factory halogen lamp perfectly with the same socket and electrical connector, for plug and play installation.   You needn't worry whether you have a CK or Non-CK socket, these bulbs are universally compatible.   (Load resistor or flash relay will be needed to prevent the hyper flash when the replacement on the Turn Signal Lights)

    *Built-in Constant Current IC Driver: A constant current driver is a device that takes any incoming voltage and smooths it out, regulates it, so a steady stream of voltage/current reaches the LED, ensures a bright, efficient and long-lasting illumination.

    *CANBUS ERROR FREE: No.   For some vehicles, it may require install decoder or load resistor to avoid turn signal hyper flash or fast blinking.

     

     

    Package include:

    2* T10 LED Bulbs


    Item Specifics
    Application Fit vehicle Interior Lights, License Plate, Dome Map Light, etc
    Beam Angle 360
    Brand AUXITO
    Bulb Color Clear
    Bulb Size T10
    Bulb Type LED
    Color White
    Color Temperature 6500K
    Features Non-polarity, Canbus error free, no error after installation
    Fitment Type Direct Replacement
    Lifetime Over 50000 hours
    Lighting Type LED
    Material Plastic
    Number of Bulbs 10
    To Fit Interior LED Light
    Voltage 12 V
    Lighting Technology LED
    Suitable For License Plate Light
    Bulb Fitment Code T10, W5W, 194, 168
    Light Color Cold White
    Type Light Bulb
    OE/OEM Part Number NA
    Wattage 12W
    Lumens 2000 lm
    Universal Fitment Yes
    Country/Region of Manufacture China
    Manufacturer Warranty 2 Years
    Interchange Part Number NA
    Superseded Part Number NA
    Manufacturer Warranty 2 Years
    Interchange Part Number NA
    Superseded Part Number NA

    Payment
    • We only accept PayPal payment, should be received within 3 days from the date of purchase.
    • Please keep the consistency of Paypal address and ebay address.
    • Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account .
    • Buyers are responsible for import duties, custom fees and taxes.Please check with your country's custom office to determine the additional costs before you finally make the purchase
    Shipping
    1. All items will be shipped in 48 hours after receiving your payment .
    2.  
    3. We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to
    4.  
    5. deliver.

     

    Returns
    • We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.
    • All returned items should be in the original packaging , return tracking information should be provided ..
    • Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .
    Contact Us
    • Our office hours are MONDAY - FRIDAY 9:00PM - 6:00PM PST, but we will response you once we get your message .There will be some delay on response if you send message or E-Mail on weekend.
    FAQ
    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long? 
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know. 
    The bulb size may be wrong, double check the item you received with the item you ordered. 
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive. 
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket. 
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    Excellent Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    10X AUXITO T10 Bright LED License Plate Light Bulbs 6000K White SMD 168 2825 194

    Specifications:

    Model number: T10

    Voltage: 9-14V DC

    Current: 0.1A

    Power: 1.2W

    Lumen: 200LM

    Lamp beads: 14pcs 2835SMD

    Color: 6500k white (measured color temperature: 6192k)
    The following plugs are applicable:

    T10, W5W, 194, 168

     

     

    Features:

    *Easy installation: small size, close to 1:1 with the original halogen lamp

    *Excellent Heat Dissipation Construction: Our bulbs use built of lightweight and high-strength aluminum alloy as bulb body to keep themselves cool, even if they're used in constant-on applications like daytime running lights, they still illuminate non-fading brightness.   

    *Non-Polarity Design: Directly replace your factory halogen lamp perfectly with the same socket and electrical connector, for plug and play installation.   You needn't worry whether you have a CK or Non-CK socket, these bulbs are universally compatible.   (Load resistor or flash relay will be needed to prevent the hyper flash when the replacement on the Turn Signal Lights)

    *Built-in Constant Current IC Driver: A constant current driver is a device that takes any incoming voltage and smooths it out, regulates it, so a steady stream of voltage/current reaches the LED, ensures a bright, efficient and long-lasting illumination.

    *CANBUS ERROR FREE: No.   For some vehicles, it may require install decoder or load resistor to avoid turn signal hyper flash or fast blinking.

     

     

    Package include:

    2* T10 LED Bulbs



    • We only accept PayPal payment, should be received within 3 days from the date of purchase.
    • Please keep the consistency of Paypal address and ebay address.
    • Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account .
    • Buyers are responsible for import duties, custom fees and taxes.Please check with your country's custom office to determine the additional costs before you finally make the purchase
    1. All items will be shipped in 48 hours after receiving your payment .
    2.  
    3. We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to
    4.  
    5. deliver.

     

    • We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.
    • All returned items should be in the original packaging , return tracking information should be provided ..
    • Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .
    • Our office hours are MONDAY - FRIDAY 9:00PM - 6:00PM PST, but we will response you once we get your message .There will be some delay on response if you send message or E-Mail on weekend.
    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long? 
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know. 
    The bulb size may be wrong, double check the item you received with the item you ordered. 
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive. 
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket. 
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    All rights reserved.



    On Jun 14, 2025 at 00:23:25 PDT, seller added the following information:

    DataCaciques