🔥 General Heat Press Settings for Patches (PVC / TPU / Rubber Patches):

          •        Temperature: Around 140°C - 160°C (284°F - 320°F)

          •        Time: 10 - 15 seconds

          ?        Pressure: Medium pressure (typically 3 - 5 bar or 30 - 50 psi)

 

? Recommended Settings by Fabric Type:

 

*Cotton* 150°C - 160°C (302°F - 320°F)       12 - 15 seconds

*Polyester*      140°C - 150°C (284°F - 302°F)       10 - 12 seconds

*Blended Fabrics* 150°C - 155°C (302°F - 311°F)       12 - 14 seconds

 

?? Important Tips:

          1. Use a protective sheet: It?s recommended to place a Teflon sheet or parchment paper over the patch before pressing to prevent melting or sticking.

          2. Always test first: Different fabrics absorb heat differently. Always test on a small, hidden area first to determine the best settings.🔥 General Heat Press Settings for Patches (PVC / TPU / Rubber Patches):

          •        Temperature: Around 140°C - 160°C (284°F - 320°F)

          •        Time: 10 - 15 seconds

          •        Pressure: Medium pressure (typically 3 - 5 bar or 30 - 50 psi)

 

👕 Recommended Settings by Fabric Type:

 

*Cotton* 150°C - 160°C (302°F - 320°F)       12 - 15 seconds

*Polyester*      140°C - 150°C (284°F - 302°F)       10 - 12 seconds

*Blended Fabrics* 150°C - 155°C (302°F - 311°F)       12 - 14 seconds

 

⚠️ Important Tips:

          1. Use a protective sheet: It’s recommended to place a Teflon sheet or parchment paper over the patch before pressing to prevent melting or sticking.

          2. Always test first: Different fabrics absorb heat differently. Always test on a small, hidden area first to determine the best settings.