eBay

We support various custom combinations. Please contact customer service.

Package Contents:

1* Slide Table

1* Slide Table + 3.2NM Motor

1* Slide Table + 3.2NM Motor + Controller + Sensor

(Select one option)

Slide Table：

Motor（Actual torque is 3.2 Nm）：

Closed-Loop Integrated Machine: Closed-Loop Control — The motor tail features an encoder that provides real-time position feedback to the driver. Missed a step? Corrected instantly.

Aspect	Standard Stepper Motor (Open-Loop)	Closed-Loop Integrated Stepper Motor
Control Method	Open-loop control: Commands are sent without verifying execution.	Closed-loop control: Real-time position feedback; immediately compensates for any deviation.
High-Speed Performance	Significant torque drop: Torque decreases rapidly as speed increases, prone to stalling.	Good torque retention: Maintains higher torque at high speeds, more efficient.
Heat & Noise	Constant maximum current: Runs at rated current regardless of load, resulting in higher heat generation.	Load‑dependent current: Automatically reduces current under light load; lower temperature rise, smoother and quieter operation.
Positioning Accuracy	Depends on driver micro‑stepping, but cannot compensate for missed steps caused by overload.	Real‑time encoder feedback, 100% no missed steps, extremely high positioning accuracy.
Installation & Wiring	Motor and driver are separate; wiring is relatively complex.	Integrated design: Driver built into the motor; no complex wiring, plug‑and‑play.

Controller：

Parameter	Specification
Model	HF020
Enclosure Dimensions	Length 99.7mm Width 72mm Height 17.0mm
Operating Voltage	DC 12-24V, >1A Power Supply
Cutout Dimensions	Length 92.0mm Width 69.8mm
Display	5-digit, High-brightness LED
Operating Environment	-5℃~60℃ (Non-condensing)
Motor Pulse Output Voltage	Open Collector 24V, Directly compatible with 5-24V drivers
Motor Pulse Frequency	85 kHz
Inputs	7 Inputs. Active low (0V signal)
Outputs	2 Outputs. Output Voltage: 0V

Sensor：

Power supply