High power for your subwoofer system
Focal's FDP 1.900V2 mono subwoofer amplifier can deliver up to 850 watts RMS to your subwoofer — providing the low-frequency foundation you need for your vehicle's high-powered audio system. The amp's Class D technology delivers this big-league power from a chassis that's smaller than a 2" stack of printer paper.
The extensive and versatile filter section lets you optimize the tone and performance for a wide variety of subwoofers, while a variable bass boost and adjustable phase focus the bass in your vehicle. The speaker-level inputs and auto turn-on let you connect this amp to almost any car stereo, even a factory radio.
Remote control and clip light
Focal includes a wired remote bass level controller so you can tweak your bass from song to song from your front seat. This remote also features an LED clip light that'll let you know if you're overloading the amp.
Focal FDP 1.900V2
Outputs, inputs, and three of bass tone controls
Product highlights:
mono subwoofer amplifier
550 watts RMS x 1 at 4 ohms
850 watts RMS x 1 at 2 ohms
500 watts RMS x 1 at 1 ohm
Class D amp technology
variable low-pass filter (40-350 Hz, 24 dB/octave)
variable high-pass/subsonic filter (10-400 Hz, 24 dB/octave)
variable bass boost (0-6 dB at 40 Hz)
variable phase control (0-180 degrees)
red LED clip distortion light
More info:
wired remote level control with LED clip light included
bridgeable with a second FDP 1.900V2 amp to produce up to 1,700 watts RMS x 1 at 4 ohms
preamp inputs and outputs
speaker-level inputs (require speaker wire to RCA adapters)
auto signal-detection turn-on with high-level input
fuse rating: 25A x 2
wiring and hardware not included with amplifier
8-gauge power and ground leads recommended
dimensions: 10.02"W x 2"H x 8"D
warranty: 1 year
60-day returns
MFR # FDP1.900V2
Item # 091FDP190V
What's in the box:
Focal FDP 1.900V2 owner's manual
If you need assistance accessing this owner's manual, please give us a call.
View box contents
Mono amplifier
Two 25-amp ATO fuses (internally installed)
1 Long mounting bracket
2 Short mounting brackets
Wired remote control
16.5' Remote cable (RJ-25 plugs on each end)
2mm Allen wrench
3mm Allen wrench
4mm Allen wrench
4 Countersunk M4 x 8mm screws
Four 3/4" Screws
Two 3/8" Screws
4 Rubber flat washers
Operations manual