Attention:
Please note there are several compatible remotes that look similar but not exactly like the photo pictured. We will do our best to ship you the remote pictured; however, the remote you receive may look different than the remote pictured. No worries, the board will program to your system the same.
See pictures for an example of what you will receive.
One (1)
Aftermarket Security Installed System remote
keyless entry fob alarm controller
Transmitter control clicker keyfob controller replacement
VIPER PYTHON DEI DIRECTED ELECTRONICS CLIFFORD MATRIX
|
FCC ID: EZSDEI7153 (Alternate Spelling: EZSDEI7153) Part #: Part #: 7153P (Interchangeable) Part #s: 7152X 7152V 7251P 7251V 7251X 7153P 7153X 7153V One 1- way LED Light Color: Orange Buttons: 5: Lock, Unlock, Remote Starter, AUX, f; LED Orange Frequency: 433-434 MHz Battery: 1; CR2032 or 2: CR2016’s See Item Specifications for more details
|
|
Compatible with the following Aftermarket installed security systems: Viper, Python and Clifford systems and can be used in place of the 7153P or 7153X Will work with Clifford and Python RF kits: Viper Viper 5101 Viper 5301 Viper 5501 Viper 5601 Viper 5701 Viper 5901 Python Python 872 LE Python 580 LE Clifford Matrix Clifford Matrix 1.3X Clifford Matrix 3.3X |
|
Programming Instructions:
A Valet / Programming switch is required to program this remote. Programming can be difficult if you are not familiar with it. Please read the programming instructions (below) before purchasing. Assistance from an auto specialty shop or locksmith may be needed. _____________________________
Programming Instructions:
PREPARE VEHICLE FOR REMOTE LEARNING: 1. Door. Open a door.
2. Key. Turn the key to the ON position.
3. Choose. Within 5 seconds press and release the Valet/Program button on the system CONTROL CENTER one time.
4. Select. Within 5 seconds, press & HOLD the Valet/Program button on the system CONTROL CENTER. LED will flash one time and the siren (if connected) will chirp to confirm vehicle is ready for the remote pairing.
5. Ready. Release the Valet/Program button & proceed as follows.
The following instructions will direct you through the available programming options.
1. Press and hold the F button for 8 seconds, the remote emits one long beep and the transmit LED turns on.
2. Press and hold the START button for 1 second, 3 transmit LED flashes and 3 beeps indicate remote is ready to pair.
3. Press and release 1 time the Integrated Programming Button (IPB) on the XL202.
4. Within 5 seconds, press and hold the IPB. The status LED will flash one time to confirm the system is ready for remote pairing.
5. Press the LOCK button Please Note:
For transmitter learn Step #1, you must press the (*) button on the transmitter, this will automatically program the transmitter buttons to the default function configuration. See the transmitter button auto learn chart for the assignment functions.
1-way remote control: there is no confirmation for this remote control.
6. Release the IPB. Remote programming will exit by itself after 30 seconds and the transmit LED will turn off.
Note: Consult the installation center for the location of the XL202 or refer to dealer for programming.
REMOTE FEATURES:
1. Press and hold the F button for 8 seconds, the remote emits one long beep and the transmit LED turns on.
2. Press the UNLOCK button to access the remote operation features, 2 transmit LED flashes and 2 beeps indicate the remote features menu is accessed. Press the buttons indicated in the tables below to set the feature option.
3. The LEDs next to the button(s) indicate the feature settings Feature Button Press LED ON LED OFF LED Flash Keypad Lock LOCK Auto Off Remote Beeps UNLOCK Beeps On Beeps Off Triggers only
EXIT PROGRAMMING: Remote programming will exit by itself after 30 seconds and the transmit LED will turn off. |
How to find out if this remote is compatible with your Vehicles’ installed RKE System
If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.
1. Check the back of your current or old keyless remote to match FCC ID /Part #’s.
2. Contact your local dealer and tell them your VIN# and ask what part # / FCC ID you need.
Your vehicle will be installed with one of the following keyless entry systems:
a. Standard Keyless Remote Packages: Installed at time of manufacture.
b. Optional Keyless Remote Packages: Installed by a dealer.
c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.
d. No remote keyless entry system at all.
The
above information can change which remote you need
for your installed remote keyless system.
Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days.
PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.
Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).
100% Guarantee Remote Shipping / Return Policy
Warranty/Returns:
We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.
Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.
Does this keyless remote entry come with a battery?
Yes. It will have a working battery installed.
Battery Condition:
A. All remotes sold on Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply working.
Some are new and some are used.